Key specifications
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 72.0"D × 91.0"H
- Type
- Walk-In Freezer
- Style
- Outdoor
- Installation Type
- Floor Model
- Material
- Coated Steel
Spec sheet
Master-Bilt QS Series QODF7766-C Outdoor Walk-In Freezer, 6' x 6' x 7'7" H, With Floor, -10°F, Self-Contained R290 Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Outdoor -10°F frozen storage. This 6' x 6' walk-in freezer is 7 ft 7 in high, includes a floor, and uses self-contained Capsule Pak ECO refrigeration with R290 refrigerant.
- 26-gauge stucco embossed coated steel panels provide the interior and exterior finish.
- Four-inch panels use foamed-in-place HFO polyurethane insulation.
- The outdoor configuration includes a membrane roof and trim.
- The self-closing door has a locking deadbolt handle with an inside safety release.
- The refrigeration system uses a LogiTemp electronic controller, digital thermometer, and LED light.
- Specified electrical service is 115 Volts, 60 Hz, and 1-Phase.
- Made in USA.
Overall Dimensions:
72.0"W x 72.0"D x 91.0"HProduct Weight:
1288.0 lbQuick Ship
Outdoor -10°F Freezer
Specified for outdoor freezer operation at -10°F.
Self-Contained R290 Refrigeration
Includes a Capsule Pak ECO refrigeration system using R290 refrigerant; system model CPF100PC-E-0.
Included Floor
The walk-in includes a smooth aluminum interior floor.
Coated Steel Panels
Interior and exterior panels use 26-gauge stucco embossed coated steel.
Outdoor Membrane Roof
The outdoor configuration includes a membrane roof and trim.
Self-Closing Door
The door includes a locking deadbolt handle with an inside safety release.
Four-Inch Insulated Panels
Panels are foamed-in-place with HFO polyurethane insulation.
LogiTemp Electronic Controller
The Capsule Pak ECO refrigeration system uses a LogiTemp electronic controller system.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.