Key specifications
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 168.0"D × 91.0"H
- Type
- Walk-In Freezer
- Style
- Outdoor
- Installation Type
- Floor Model
- Material
- Coated Steel
Spec sheet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QODF77614-C is an outdoor -10°F walk-in freezer measuring 6 ft x 14 ft x 7 ft 7 in and supplied with a floor.
- Includes a self-contained CPF175PC-E-4 Capsule Pak ECO refrigeration system using R290 refrigerant.
- Built with 26-gauge embossed coated steel interior and exterior surfaces and a smooth aluminum interior floor.
- Features a self-closing door, deadbolt locking handle, membrane roof, LogiTemp electronic controller, digital thermometer, and LED light.
Overall Dimensions:
72.0"W x 168.0"D x 91.0"HProduct Weight:
2015.0 lbOutdoor freezer design
Specified for outdoor installation and -10°F operation.
Self-contained refrigeration
Uses a CPF175PC-E-4 Capsule Pak ECO refrigeration system with R290 refrigerant.
Insulated panels
Full 4-inch panels are foamed in place with HFO polyurethane insulation.
Coated steel construction
26-gauge corrosion-resistant stucco embossed coated steel is used on the interior and exterior surfaces, except the interior floor.
Included floor
The supplied floor has a smooth aluminum interior surface.
Door security and closure
The door is self-closing and uses a deadbolt locking handle with an inside safety release.
Outdoor weather protection
Outdoor models include a membrane roof and trim.
Electronic controls
The refrigeration system uses a LogiTemp electronic controller.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.