Key specifications
- Phase
- 1-Phase
- Dimensions
- 120.0"W × 120.0"D × 91.0"H
- Type
- Walk-In Freezer
- Style
- Outdoor
- Installation Type
- Floor Model
- Installation Environment
- Outdoor
Spec sheet
Master-Bilt QS Series QODF771010-C Outdoor 10' x 10' Walk-In Freezer, 7'7" H, With Floor, Self-Contained R290 Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QODF771010-C is an outdoor walk-in freezer measuring 10' x 10' x 7'-7" and supplied with a floor. It is designed for a -10°F compartment temperature and includes a self-contained CPF175PC-E-4 Capsule Pak refrigeration system using R290 refrigerant.
- Construction: 4-inch foamed-in-place HFO polyurethane insulated panels with 26 gauge embossed coated steel interior and exterior surfaces.
- Outdoor features: Membrane roof and trim for outdoor installation.
- Door: Self-closing door with a locking deadbolt handle.
- Interior: Smooth aluminum floor surface.
- Controls: LogiTemp electronic controller, digital thermometer, light switch, and LED light.
Overall Dimensions:
120.0"W x 120.0"D x 91.0"HProduct Weight:
2227.0 lbOutdoor Installation
Includes a membrane roof and trim for outdoor installation.
Self-Contained Refrigeration
Uses a CPF175PC-E-4 Capsule Pak refrigeration system with R290 refrigerant.
Freezer Temperature
Designed for a -10°F compartment temperature.
Insulated Panels
Panels are 4 inches thick with foamed-in-place HFO polyurethane insulation.
Coated Steel Construction
Interior and exterior surfaces use 26 gauge embossed coated steel.
Floor
Supplied with a smooth aluminum interior floor.
Self-Closing Door
Includes a self-closing door with a locking deadbolt handle.
Electronic Controls
Includes a LogiTemp electronic controller, digital thermometer, light switch, and LED light.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.