Key specifications
- Phase
- 1-Phase
- Dimensions
- 96.0"W × 168.0"D × 91.0"H
- Type
- Walk-In Cooler
- Style
- Self-Contained
- Installation Type
- Floor Model
- Installation Environment
- Outdoor
Spec sheet
Master-Bilt QS Series QODB77814-C Outdoor Self-Contained Walk-In Cooler with Floor, 8' x 14' x 7'7" H, R290, 115V
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QODB77814-C is an outdoor, self-contained walk-in cooler with a floor, membrane roof, and R290 Capsule Pak ECO refrigeration.
- 8' x 14' configuration with 7'7" overall height.
- 574 cu. ft. capacity.
- 26 gauge coated steel interior and exterior finish with a smooth aluminum interior floor.
- Self-closing door with a deadbolt locking handle.
- 115V, 60 Hz, single-phase electrical specification.
Overall Dimensions:
96.0"W x 168.0"D x 91.0"HProduct Weight:
2312.0 lbSelf-Contained Refrigeration
Uses the CPB075PC-E-0 Capsule Pak ECO refrigeration system with R290 refrigerant.
Outdoor Membrane Roof
Includes a white membrane roof and trim for outdoor installation.
Coated Steel Panels
Panels use 26 gauge corrosion-resistant stucco embossed coated steel on the interior and exterior.
Aluminum Interior Floor
The included floor has a smooth aluminum interior surface.
Self-Closing Door
The walk-in includes a self-closing door with a spring-actuated door closer.
Deadbolt Locking Handle
The door includes a deadbolt locking handle with independent key and padlock capability and an inside safety release.
Low-Ambient Heater
The outdoor cooler refrigeration system includes a heater for low-ambient conditions.
Electronic Controller
The system uses a LogiTemp electronic controller.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.