Key specifications
- Phase
- 1-Phase
- Dimensions
- 96.0"W × 144.0"D × 91.0"H
- Type
- Walk-In Cooler
- Style
- Outdoor
- Installation Type
- Floor Model
- Material
- Steel
Spec sheet
Master-Bilt QS Series QODB77812-C Outdoor Walk-In Cooler with Floor, 8' x 12' x 7'7" H, R290 Self-Contained Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt QS Series QODB77812-C is an outdoor walk-in cooler measuring 8 ft wide by 12 ft deep by 7 ft 7 in high. It includes a floor and a CPB075PC-E-0 R290 Capsule Pak ECO self-contained refrigeration system.
- Configured for +35°F cooler operation with 115-volt, 60 Hz, single-phase electrical service.
- Panels use 26 gauge stucco embossed coated steel, with a smooth aluminum interior floor surface.
- The self-closing door includes a deadbolt locking handle.
- Outdoor construction includes a white membrane roof and trim.
Overall Dimensions:
96.0"W x 144.0"D x 91.0"HProduct Weight:
2104.0 lbSelf-Contained Refrigeration
The CPB075PC-E-0 Capsule Pak ECO system uses R290 refrigerant and is designed as a self-contained refrigeration system.
Outdoor Weather Protection
The outdoor model includes a white membrane roof and trim.
Insulated Panels
The walk-in uses 4 in thick panels with foamed-in-place HFO polyurethane insulation.
Coated Steel Panels
Panels use 26 gauge stucco embossed coated steel on the interior and exterior, except for the interior floor surface.
Floor Construction
The supplied floor has a smooth aluminum interior surface.
Door Security
The door is self-closing and includes a deadbolt locking handle with an inside safety release.
Electronic Controls
The refrigeration system uses a LogiTemp electronic controller.
Interior Lighting
A high-output low-profile LED light is positioned above the door.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.