Key specifications
- Phase
- 1-Phase
- Dimensions
- 96.0"W × 120.0"D × 91.0"H
- Type
- Walk-In Cooler
- Style
- Outdoor
- Installation Type
- Floor Model
- Material
- Coated Steel
Spec sheet
Master-Bilt QS Series QODB77810-C Outdoor Walk-In Cooler with Floor, 8 ft x 10 ft x 7 ft 7 in H, R290 Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Outdoor cold storage: This walk-in cooler measures 8 ft x 10 ft x 7 ft 7 in high and includes a floor and membrane roof for outdoor installation.
It features 26-gauge embossed coated steel interior and exterior finishes, 4-inch foamed-in-place polyurethane-insulated panels, a self-closing door with a locking deadbolt handle, and CPB075PC-E-0 R290 Capsule Pak ECO refrigeration.
- 115 Volt, 60 Hz, single-phase electrical specification
- Smooth aluminum interior floor
- Low-profile LED light positioned above the door
- LogiTemp electronic controller system
Overall Dimensions:
96.0"W x 120.0"D x 91.0"HProduct Weight:
1794.0 lbOutdoor Configuration
Outdoor model with a membrane roof and trim for weather protection.
Insulated Panels
Full 4-inch panels are foamed in place with EPA-compliant polyurethane insulation.
Panel Finish
Interior and exterior panels use 26-gauge corrosion-resistant stucco embossed coated steel.
Floor
The supplied floor has a smooth aluminum interior surface.
Door Hardware
The door is self-closing and includes a deadbolt locking handle with an inside safety release.
Refrigeration
CPB075PC-E-0 R290 Capsule Pak ECO refrigeration system.
Electronic Controls
Outdoor systems use a LogiTemp electronic controller system.
Lighting
A low-profile LED light is positioned above the door.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.