Key specifications
- Amps
- 5.9 Amps
- Phase
- 1-Phase
- Dimensions
- 27.25"W × 27.5"D × 50.0"H
- Type
- Dipping Cabinet
- Style
- Low-Glass
- Installation Type
- Floor Model
Spec sheet
Master-Bilt DD-26L Low-Glass Ice Cream Dipping/Display Cabinet, 4 x 3-Gallon Tub Capacity, White, LED Lighting, 115V
- Low Curved Glass
- Low Glass
- Straight Glass
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Master-Bilt DD-26L is a low-glass ice cream dipping and display cabinet with capacity for four 3-gallon display tubs and no storage compartment.
- Painted galvanized steel interior and exterior with a stainless steel top and serving deck.
- Slanted, low-glass display design with tempered viewing glass.
- LED interior lighting with an independent on/off switch.
- Electronic temperature control with a 5°F to -5°F temperature range.
- R290 refrigerant, cold-wall evaporator, and a 3/5 HP condensing unit.
- Operates on 115 Volts, 60 Hz, single phase power with a NEMA 5-15P plug.
Overall Dimensions:
27.25"W x 27.5"D x 50.0"HProduct Weight:
264.0 lbFour-Tub Display Capacity
Provides four display positions for 3-gallon tubs; the DD-26L has no storage compartment.
Low-Glass Display
Uses a slanted low-glass top with a frameless double-pane tempered glass viewing window and tempered glass ends.
LED Interior Lighting
Includes LED interior lighting controlled by an independent on/off switch.
Temperature Control
Uses a standard electronic controller to maintain a 5°F to -5°F temperature range.
Stainless Steel Serving Deck
Features a stainless steel top and attached stainless steel serving deck.
Refrigeration System
Uses R290 refrigerant, a cold-wall evaporator, and a 3/5 HP condensing unit.
Drain Connection
Includes a drain with a standard garden hose connection.
Electrical Connection
Operates on 115 Volts, 60 Hz, single phase power with a NEMA 5-15P plug and 10-foot cord.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.