Key specifications
- Amps
- 5.9 Amps
- Phase
- 1-Phase
- Dimensions
- 27.25"W × 27.5"D × 50.0"H
- Type
- Ice Cream Freezer
- Style
- Dipping/Display
- Installation Type
- Floor Model
Spec sheet
Master-Bilt DD-26 Ice Cream Dipping/Display Freezer, 4 x 3-Gallon Tub, Slanted Glass, White
- Low Curved Glass
- Low Glass
- Straight Glass
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The DD-26 is an ice cream dipping/display freezer with capacity for four 3-gallon tubs and no tub storage compartment.
It features slanted glass, a frameless double-pane tempered glass viewing window, interior LED lighting with an independent on/off switch, and a stainless steel serving deck. The cabinet has a painted galvanized steel interior and exterior.
- Temperature range: -5°F to 5°F
- Electrical: 115 Volts, 60 Hz, 1-Phase, 5.9 Amps
- NEMA 5-15P plug with 10-foot cord
Overall Dimensions:
27.25"W x 27.5"D x 50.0"HProduct Weight:
264.0 lbFour-Tub Display Capacity
Displays four 3-gallon tubs.
Slanted Tempered Glass
The viewing window is frameless, double-pane tempered glass with a slanted top display.
Interior LED Lighting
LED interior lighting is controlled by an independent on/off switch.
Painted Galvanized Steel Cabinet
The interior and exterior use painted galvanized steel.
Stainless Steel Serving Deck
The unit includes a stainless steel serving deck.
Cold Wall Refrigeration
The refrigeration system uses a cold wall evaporator and R290 refrigerant.
Electronic Temperature Control
A standard electronic controller maintains the stated product temperature range.
Plug-In Electrical Connection
The unit uses a 115 Volt, 60 Hz, 1-Phase connection with a NEMA 5-15P plug and 10-foot cord.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.