Key specifications
- Amps
- 1 Amp
- Phase
- 1-Phase
- Dimensions
- 24.5"W × 28.0"D × 38.0"H
- Type
- Remote Condenser
- Style
- Vertical Discharge
- Refrigeration Type
- Air-Cooled
Spec sheet
Manitowoc JCT1200-261 Vertical Discharge Air-Cooled Remote Condenser, R410A, for Indigo NXT iT1200N Ice Machines
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Manitowoc JCT1200-261 is a vertical-discharge, air-cooled remote condenser for Indigo NXT iT1200N ice machines using R410A refrigerant.
The remote condenser operates from -20°F to 120°F and supports installation with up to 100 feet of combined refrigerant line length, subject to installation guidelines.
- Configuration: Vertical discharge and air-cooled operation
- Compatibility: Manitowoc Indigo NXT iT1200N ice machines
- Refrigerant: R410A
- Electrical service: 208-230 Volts, 60 Hz, 1-Phase
- Installation: Remote system with pre-charged components and quick-connect fittings; line sets are ordered separately
Overall Dimensions:
24.5"W x 28.0"D x 38.0"HProduct Weight:
67.0 lbVertical Discharge
Discharges condenser air vertically.
Air-Cooled Operation
Uses air cooling for the remote condensing system.
iT1200N Compatibility
Designed for Manitowoc Indigo NXT iT1200N ice machines.
R410A Refrigerant
Specified for use with R410A refrigerant.
Pre-Charged Connections
The remote system uses pre-charged components with quick-connect fittings; interconnecting line sets are ordered separately.
Operating Range
Condenser operation is specified from -20°F to 120°F.
Installation Distance
Maximum combined refrigerant line length is 100 feet, with a maximum vertical rise of 35 feet and maximum vertical drop of 15 feet.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.