Key specifications
- Phase
- 1-Phase
- Dimensions
- 72.0"W × 72.0"D × 90.25"H
- Type
- Walk-In Freezer
- Style
- Soft Rail
- Installation Type
- Floor Model
- Material
- Galvanized Steel
Spec sheet
Leer QS667FF Walk-In Freezer, 6' x 6' x 7'6-1/4"H, Indoor, Stainless Steel Floor, -10°F
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Leer QS667FF is a Quick Ship, 6' x 6' indoor walk-in freezer with a -10°F temperature setting and soft rail panels.
It includes a reinforced 16-gauge stainless steel floor rated for an 800 lbs/ft² non-rolling load, 4.25-inch foamed-in-place polyurethane insulation, and a 36" x 78" flush-mounted in-fitting door.
- Self-contained Heatcraft PRO3 refrigeration with R-455A refrigerant
- 26-gauge acrylic-coated embossed galvanized steel interior and exterior
- Cam-lock assembly panels with cam-down ceiling
- Vapor-proof light, dial thermometer, heatwire, and pressure relief valve
- 230 Volts, 60 Hz, single-phase power
Overall Dimensions:
72.0"W x 72.0"D x 90.25"HProduct Weight:
1395.0 lbSoft Rail Panels
Cam-lock assembly panels use a soft rail construction with a cam-down ceiling.
Stainless Steel Floor
The reinforced 16-gauge stainless steel floor is rated for an 800 lbs/ft² non-rolling load.
Foamed-In-Place Insulation
Panels contain 4.25-inch foamed-in-place polyurethane insulation.
Self-Contained Refrigeration
The unit uses a self-contained Heatcraft PRO3 refrigeration system with R-455A refrigerant.
Flush-Mounted Door
The walk-in has a 36" x 78" flush-mounted in-fitting door with stainless steel hardware.
Built-In Components
Included components include a vapor-proof light, dial thermometer, heatwire, and pressure relief valve.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.