Key specifications
- Construction
- Stainless steel and welded base
- Dimensions
- 64.5"W × 30.0"D × 74.75"H
- Overshelf count
- 3
- Overshelf adjustment
- 2-inch increments
- Full-size pan capacity
- 3 pans per shelf
- Caster configuration
- 4 x 3-inch swivel casters; 2 braked
Lakeside SS60 Tray Starter Station, 64-1/2"W, Extended Work Ledge, 3 Adjustable Overshelves, Stainless Steel, Casters
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Lakeside SS60 is a tray starter station with a 64-1/2-inch width, an extended work ledge, and three overshelves adjustable in 2-inch increments.
Each overshelf holds three full-size pans. The station has stainless steel and welded base construction, 1-inch square tube legs, four 3-inch swivel casters with two brakes, and detachable mounting brackets.
Overall dimensions are 64.5 inches wide by 30 inches deep by 74.75 inches high. The SS60 is NSF listed.
Overall Dimensions:
64.5"W x 30.0"D x 74.75"HProduct Weight:
260.0 lbAdjustable overshelves
Three overshelves adjust in 2-inch increments.
Full-size pan capacity
Each overshelf holds three full-size pans.
Extended work ledge
The station includes an extended work ledge.
Caster base
Four 3-inch swivel casters are provided, with two braked casters.
Stainless steel construction
The unit has stainless steel and welded base construction with 1-inch square tube legs.
Detachable mounting brackets
The specified design includes detachable mounting brackets.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.