Key specifications

Phase
1 phase
Dimensions
12.13"W × 14.38"D × 6.63"H
Product type
Induction plate charger/heater
Installation
Countertop
Plate compatibility
9-inch ceramic induction plates
Heating control
Built-in TempSense heat-sensing regulator
Spec sheet
Lakeside SKU: AIPH1

Lakeside AIPH1 Countertop Electric Induction Plate Charger/Heater, 900W, Stainless Steel, Accommodates 9" Plates

$6,498.50
/each
Estimated to ship in 16–19 business days
Included: Lakeside warranty 2-year parts warranty and 1-year labor warranty

Get priority processing and free 1-year protection with PREMIUM Learn about Premium

As low as $601/mo with Credit Key Learn more

Questions before you buy?

Talk to a specialist — usually within 1 hour, 9am–6pm EST.

Call (888) 307-5030 Call

Questions before you buy?

Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.

Call (888) 307-5030 Call

Specifications

Product type Induction plate charger/heater
Installation Countertop
Plate compatibility 9-inch ceramic induction plates
Heating control Built-in TempSense heat-sensing regulator
Plate locator Calibrated
Charge time Approximately 20 seconds from ambient temperature
Hold time 25–30 minutes with an insulated dome
Housing 18-gauge stainless steel
Top charging surface High-impact, scratch-resistant
Power 900 W
Current 7.5 A
Voltage 120 VAC
Frequency 60 Hz
Phase 1 phase
Power cord 6 ft, 14-3 grounded cord
Plug NEMA 5-15P angled plug
Overall dimensions 12 1/8 in W x 14 3/8 in D x 6 5/8 in H

Description

The Lakeside AIPH1 is a 900W countertop electric induction plate charger/heater that accommodates 9-inch ceramic induction plates. Built-in TempSense heat sensing supports consistent heating, while the calibrated plate locator supports precise plate placement.

The unit charges a plate from ambient temperature in approximately 20 seconds and provides a 25–30 minute hold time with an insulated dome. It features an 18-gauge stainless steel housing, a high-impact scratch-resistant top charging surface, rubber feet, and a 6-foot grounded power cord with an angled NEMA 5-15P plug.

Overall Dimensions:

12.13"W x 14.38"D x 6.63"H

Product Weight:

22.0 lb

9-inch plate compatibility

Accommodates 9-inch ceramic induction plates.

TempSense heat sensing

Built-in heat-sensing regulator supports consistent heating.

Calibrated plate locator

Supports precise plate placement on the charging surface.

Fast charging

Charges a plate from ambient temperature in approximately 20 seconds.

Hold time

Provides a 25–30 minute hold time with an insulated dome.

Stainless steel housing

Constructed with an 18-gauge stainless steel housing.

Charging surface

High-impact and scratch-resistant top charging surface.

Electrical connection

Uses 120 VAC, 60 Hz, single-phase power with a 6-foot 14-3 grounded cord and angled NEMA 5-15P plug.

Documentation

Cutsheet Catalog page Warranty sheet

Certifications & Compliance

Certified badge of ETL Listed
ETL Listed

Frequently Asked Questions

It accommodates 9-inch ceramic induction plates.
The charge time is approximately 20 seconds from ambient temperature.
The hold time is 25–30 minutes with an insulated dome.
It operates at 120 VAC, 60 Hz, single phase, draws 7.5A, and uses a 6-foot 14-3 grounded cord with an angled NEMA 5-15P plug.
The overall dimensions are 12 1/8 inches wide by 14 3/8 inches deep by 6 5/8 inches high.
The product cutsheet specifies a 2-year parts warranty and a 1-year labor warranty.

Need help deciding?

Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.

or call (888) 307-5030

Related Searches

EquipmentBeverage EquipmentConcession EquipmentCooking EquipmentFacility & Ventilation EquipmentFood Display & Merchandising EquipmentFood Preparation EquipmentPlumbing & Water TreatmentWarewashing EquipmentWork Tables & FabricationEquipment Services & Programs