Krowne KPP75-3-230 Back Bar Coolers
Krowne KPP75-3-230 Back Bar Coolers is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Krowne KPP75-3-230 Back Bar Coolers
Description
Krowne KPP75-3-230 Draft Beer System Power Pack
Air-cooled, triple-pump glycol chiller for long-draw draft serviceEngineered for high-volume bars, taprooms, arenas and event venues, the Krowne KPP75-3-230 Power Pack delivers rock-solid temperature control to keep every pint perfectly cold— even when your beer lines run hundreds of feet from keg to faucet. A heavy-duty 3/4 HP compressor, stainless steel cabinet and three independent 80 GPH pumps combine to move glycol quickly and quietly, maintaining a consistent 32 °F bath all day, every day.
Why this Power Pack?
- Triple 80 GPH Circulating Pumps – Independently feed multiple trunk lines or redundant loops.
- High-Capacity Cooling – 6,950 BTU evaporator rating (@15 °F) matched with a robust 3/4 HP compressor.
- Stainless Steel Construction – Corrosion-resistant interior & exterior withstand humid bar environments.
- Digital Thermostat Readout – Factory-programmed to cut out at 30 °F with 2 °F differential; simple push-button adjustments.
- Compact Footprint – 27"L × 20"W base fits easily on a stand, walk-in cooler top or wall bracket.
- Food-Safe Glycol Compatibility – 1.8 gal reservoir designed for a 33 % glycol / 67 % distilled water blend.
- Air-Cooled Condenser – No additional water hookup required; only 6" clearance needed on all sides for airflow.
- ETL & CSA Certified – Meets UL STD 60335-1 & 60335-2-89 and CSA C22.2 requirements.
Technical Specifications
| Model | KPP75-3-230 (Triple Pump) |
|---|---|
| Compressor | 3/4 HP, air-cooled |
| Cooling Capacity | 6,950 BTU/hr @ 15 °F evap. temp. |
| Circulating Pumps | 3 × 80 GPH (100 PSI max) |
| Reservoir Volume | 1.8 gal (pre-mix 33 % glycol / 67 % water) |
| Refrigerant | R-134a, 20 oz. charge |
| Dimensions (L × W × H) | 27" × 20" × 26" |
| Unit Weight | 187 lb |
| Electrical | 230 V / 60 Hz / 1-Ph, hard wired (17 A RLA, 25 A MCA) Requires 4 conductors: 2 Hot, 1 Neutral, 1 Ground |
Installation Highlights
- Mount on a level surface or optional KPP-S1 stand/KPP-W1-75 wall bracket.
- Provide a minimum of 6" clearance on all sides; ambient 50 – 90 °F, max 100 °F.
- Hard-wire to a dedicated 25 A circuit by a qualified electrician.
- Fill reservoir with approved food-grade glycol mix before running pumps.
- Plumb 1/2" O.D. coolant supply & return lines; route overflow to a drain.
Routine Maintenance
- Clean condenser fins every 90 days.
- Inspect coolant level weekly; top off with 33 % glycol mix as needed.
- Replace glycol solution every 12-18 months to maintain proper freeze protection.
- Check all coolant connectors and insulation for leaks or condensation.
Need replacement parts or accessories? Contact Krowne customer service at customerservice@krowne.com or 800-631-0442.
