Krowne

Krowne Master Tap Air-Cooled Draft Beverage System Power Pack, 3/4 HP, 120V

SKU: KPP75-1
$4,034.25
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?
(888) 307-5030
Chat
Bulk pricing available

Related Searches

Back Bar Coolers Back Bar Coolers Bar Equipment Bar Refrigeration Best Sellers Beverage Dispenser Parts & Accessories Krowne New Arrivals Restaurant Equipment Restaurant Equipment Parts

Krowne Master Tap Air-Cooled Draft Beverage System Power Pack, 3/4 HP, 120V

Single Pump, Hard-Wired, Stainless Steel Cabinet

Keep draft beer at serving temperature with a self-contained air-cooled power pack built around a 3/4 HP compressor and digital thermostat control.

  • Air-cooled power pack for Master Tap draft beverage systems
  • 3/4 HP compressor with 6,950 BTU cooling output
  • Single 80 GPH circulating pump for glycol circulation
  • Digital thermostat display for temperature monitoring and control
  • Stainless steel cabinet in a compact 27" x 20" x 26" footprint
  • Hard-wired 120V / 60 Hz / 1-phase electrical connection with ventilation clearance requirements

Overall Dimensions:

27.0"W x 20.0"D x 26.0"H

Master Tap Compatibility

Designed for Krowne Master Tap draft beer systems.

Air-Cooled Design

Self-contained air-cooled refrigeration helps maintain draft system temperatures without a water-cooled setup.

3/4 HP Compressor

Delivers a 6,950 BTU evaporator rating at 15°F for reliable cooling performance.

Digital Temperature Controller

Includes a digital thermostat with display; factory cut-out is 30°F with a 2°F differential and an adjustable range of 28°F to 34°F.

80 GPH Circulating Pump

Built-in glycol circulating pump is rated at 80 GPH and 100 PSI.

Stainless Steel Cabinet

Durable stainless steel cabinet construction is built for commercial use.

1.8-Gallon Reservoir

Reservoir capacity supports the glycol coolant mix used in the system.

Ventilation Clearance Required

Install with at least 6 inches of clearance on all sides and adequate airflow for proper operation.

Type Draft Beverage Power Pack
Refrigeration Type Air-Cooled
Installation Type Floor Model
Voltage 120 Volts
Amps 19.6 Amps
Hertz 60 Hz
Phase 1-Phase
Plug Type Hardwired
BTU 6,950 BTU
Compressor Horsepower 3/4 HP
Material Stainless Steel
Controls Digital Thermostat
Reservoir Capacity 1.8 Gallons
Pump Count 1
Refrigerant Type R134A
Shipping Width 27 Inches
Shipping Depth 20 Inches
Shipping Height 26 Inches
Shipping Weight 205 lb.
Selling Unit Each
Units Per Case 1

Documents

PDF Cutsheet PDF Download

Frequently Asked Questions

The KPP75-1 requires 120V / 60 Hz / 1-phase power and is hard wired.
It uses a 3/4 HP compressor and has a 6,950 BTU evaporator rating at 15°F.
The unit includes a digital thermostat with display. Factory settings cut out at 30°F, with an adjustable range of 28°F to 34°F.
The installation instructions specify a 66% water and 33% glycol coolant mix, and the pumps should never be run without coolant in the reservoir.
Krowne recommends at least 6 inches of clearance on all sides and proper airflow to maintain performance.
The condenser should be cleaned every 90 days, and the glycol coolant mix should be replaced every 12 to 18 months.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.

Talk to a Specialist
or call (888) 307-5030