Krowne DB108 Back Bar Coolers
Krowne DB108 Back Bar Coolers is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Description
Krowne 108" Four-Section Direct-Draw Beer Cooler with 5-Tap Tower
Model Series: DB108 – Self-Contained • DynamicChill 360°Engineered for high-volume bars that refuse to compromise on pour quality, this 108-inch Krowne draft beer cooler delivers ice-cold pints from a five-faucet stainless-steel tower while safeguarding your kegs behind four rugged, self-closing doors. Plug it in, dial in your temperature, and start serving.
Why You’ll Love It
- DynamicChill 360° technology maintains a consistent 30 °F – 40 °F keg temperature—even during rushes.
- Factory-installed, side-mounted self-contained refrigeration for true “plug-and-pour” convenience.
- One stainless-steel draft tower with 5 forward-seal faucets and a generous 28.25" × 15" drip pan.
- Four heavy-duty stainless-steel doors with built-in locks and automatic self-closing hinges.
- Reinforced keg floors, integrated kickplates, and 20-gauge coved-corner stainless-steel interior stand up to daily keg swaps.
- Digital thermostat and heated mullion reduce condensation and give you precise temperature control.
- Eco-friendly R290 hydrocarbon refrigerant lowers energy costs and supports sustainability goals.
- No floor drain needed—built-in condensate evaporator pan handles excess moisture.
- Backed by a 5-year compressor warranty + 1-year parts & labor coverage.
At-a-Glance Specs
Exterior Width | 108" (2743 mm) |
---|---|
Depth (Front-to-Back) | 25" (635 mm) |
Height | 36" (914 mm) |
Sections / Doors | 4 self-closing doors with locks |
Draft Tower | Stainless steel, 5 faucets, 28.25" × 15" drip pan |
Temperature Range | 30 °F – 40 °F (factory set at 35 °F) |
Refrigeration System | Side-mounted, self-contained; 1/3 HP compressor |
Refrigerant | R290 Hydrocarbon |
Electrical | 115 V / 60 Hz / 1-ph, 2.8 A, NEMA 5-15P plug (8 ft cord) |
Interior Construction | 20-gauge stainless steel with coved corners; 3 reinforced keg floors |
Insulation | 2" foamed-in-place, CFC-free polyurethane |
Certifications | ETLus & ETL-Sanitation listed |
Warranty | 5-year compressor • 1-year parts & labor |
This equipment is intended for the storage and service of non-potentially hazardous canned or bottled beverages and kegged beer in ambient conditions not exceeding 75 °F.