Key specifications
- Dimensions
- 54.0"W × 20.0"D × 44.5"H
- Type
- Three-Compartment Sink
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Leg Material
- Galvanized Steel
- Finish
- Stainless Steel
Spec sheet
Koolmore SC101410-12B3FA 54-Inch 3-Compartment 304 Stainless Steel Sink with Dual Drainboards, Backsplash and Faucet
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Three-compartment floor-model sink with 304 stainless steel construction, left and right drainboards, a protective backsplash, and an included center faucet.
- Three compartments measuring 10 in W x 14 in front-to-back x 10 in deep.
- Two 12 in drainboards with slanted surfaces for excess-water drainage.
- Includes an 8 in center stainless steel faucet and a 3-1/2 in basket drain with strainer.
- Galvanized steel legs with adjustable 1-1/2 in bullet feet.
- Rolled edges, rounded corners, and a protective backsplash.
- NSF certified and covered by a 90-day warranty.
Overall Dimensions:
54.0"W x 20.0"D x 44.5"HProduct Weight:
57.0 lbThree Compartments
Provides three sink compartments, each measuring 10 in wide x 14 in front-to-back x 10 in deep.
Dual Drainboards
Includes 12 in drainboards on the left and right sides with slanted surfaces for excess-water drainage.
304 Stainless Steel Construction
The sink uses 304 stainless steel construction with an 18-gauge top.
Protective Backsplash
Includes a backsplash to help prevent splashes.
Included Faucet and Drain
Includes an 8 in center stainless steel faucet and a 3-1/2 in basket drain with strainer.
Adjustable Base
Galvanized steel legs are fitted with adjustable 1-1/2 in bullet feet.
Rolled Edges and Rounded Corners
Features rolled edges and rounded corners.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.