Key specifications
- Dimensions
- 51.0"W × 21.0"D × 43.2"H
- Type
- Compartment Sink
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Base Material
- Galvanized Steel
- Finish
- Stainless Steel
Spec sheet
Koolmore KM-SC151514-N3 51-Inch 3-Compartment 304 Stainless Steel Commercial Sink with Backsplash and Faucet Holes
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The KoolMore KM-SC151514-N3 is a three-compartment commercial sink with 304 stainless steel construction and a 9.7-inch backsplash.
- Each compartment measures 15 inches wide x 15 inches front-to-back x 14 inches deep.
- Overall dimensions are 51 inches wide x 21 inches deep x 43.2 inches high.
- Includes one set of splash-mount faucet holes and a 3-1/2-inch basket drain with strainer.
- Galvanized steel legs include plastic bullet feet and 1-inch adjustment.
- Specified without drainboards and NSF certified for sanitation.
Overall Dimensions:
51.0"W x 21.0"D x 43.2"HProduct Weight:
78.0 lbThree Compartments
Three sink compartments measure 15 inches wide x 15 inches front-to-back x 14 inches deep each.
304 Stainless Steel Construction
The sink exterior is constructed from 304 stainless steel.
18-Gauge Top
The top is listed as 18 gauge and part of the 300 series stainless steel specification.
Backsplash
Includes a 9.7-inch backsplash.
Splash-Mount Faucet Holes
Includes one set of splash-mount faucet holes.
Basket Drain With Strainer
Includes a 3-1/2-inch basket drain with strainer.
Galvanized Steel Legs
The base uses galvanized steel legs with plastic bullet feet.
Adjustable Legs
The legs are adjustable by 1 inch.
Without Drainboards
The sink is specified without drainboards.
Rust And Corrosion Resistance
The product cutsheet identifies the sink as rust and corrosion resistant.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.