Key specifications
- Amps
- 14 Amps
- Phase
- 1-Phase
- Dimensions
- 33.1"W × 23.1"D × 66.4"H
- Type
- Heated Holding Cabinet
- Style
- Non-Insulated
- Installation Type
- Floor Model
Spec sheet
Koolmore KM-CH36-WNGL Commercial Heated Holding Cabinet, Full-Size, Non-Insulated, Glass Door, 36-Pan Capacity
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The KoolMore KM-CH36-WNGL is a full-size heated holding cabinet with a non-insulated aluminum exterior, wire racks, and a full-height glass door.
- Capacity: Holds up to 36 full-size sheet pans.
- Controls: Mechanical controls with a 75–185 °F temperature range.
- Construction: Aluminum exterior and interior with a non-insulated design.
- Mobility: Four polyurethane swivel casters, including two with brakes.
- Electrical: 120 Volts, 1,500 Watts, 60 Hz, 1-phase, with a NEMA 5-15P plug.
Overall Dimensions:
33.1"W x 23.1"D x 66.4"HProduct Weight:
143.0 lbNon-Insulated Construction
The cabinet uses a non-insulated design.
Full-Size Pan Capacity
Specified to hold up to 36 full-size sheet pans.
Glass Door
The cabinet has one full-height glass door.
Wire Racks
Wire racks provide 16 rack positions.
Aluminum Construction
The exterior and interior are aluminum.
Mechanical Controls
Mechanical controls provide a 75–185 °F temperature range.
Swivel Casters
Four polyurethane swivel casters are included, with two casters equipped with brakes.
Electrical Configuration
The cabinet is specified at 120 Volts, 1,500 Watts, 60 Hz, and 1-phase with a NEMA 5-15P plug.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.