Key specifications
- Amps
- 1 Amp
- Phase
- 1-Phase
- Dimensions
- 29.5"W × 27.94"D × 34.0"H
- Type
- Remote Condenser
- Style
- Vertical Discharge
- Cooling Type
- Air Cooled
Spec sheet
Koolaire JCT1500 Vertical-Discharge Air-Cooled Remote Condenser Unit for KDT-1700N/KYT-1700N
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Koolaire JCT1500 is a vertical-discharge, air-cooled remote condenser unit for KDT-1700N or KYT-1700N ice machines.
It can be installed indoors or outdoors at a location away from the ice machine to dissipate heat remotely. The condenser operates from -20°F to 120°F and has a maximum line length of 100 ft under the manufacturer's installation guidelines.
- Dimensions: 29.5 in W x 27.94 in D x 34 in H
- Electrical service: 208-230 V, 60 Hz, single phase, 1 A
- Interconnecting refrigerant lines, ice machine, and storage bin are ordered separately.
Overall Dimensions:
29.5"W x 27.94"D x 34.0"HProduct Weight:
79.0 lbVertical Discharge
The condenser uses a vertical-discharge configuration.
Air Cooled
Uses air-cooled remote condensing.
Remote Heat Dissipation
Dissipates heat at a location away from the ice machine.
Compatible Ice Machines
Designed for KDT-1700N or KYT-1700N ice machines.
Installation Locations
The cutsheet states that the remote condenser can be installed indoors or outdoors.
Line Length Guidance
The maximum line length is 100 ft, with installation limits for vertical rise and drop.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.