Key specifications
- Type
- Walk-In Freezer
- Installation Type
- Floor Model
- Material
- Galvalume
- Finish
- Galvalume
- Interior Finish
- Embossed Galvalume
- Size
- 10' x 8' x 7' 6"
Spec sheet
Kolpak Kold-Front KF7-1008-FR Indoor Walk-In Freezer, 10' x 8' x 7'6", with Floor, Galvalume Interior/Exterior and Pre-Charged Remote Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Kolpak Kold-Front KF7-1008-FR is an indoor walk-in freezer with a .100 smooth aluminum Era floor, Galvalume interior and exterior walls, and pre-charged remote refrigeration.
- Nominal catalog size: 10' x 8' x 7' 6".
- Physical dimensions: 116 inches wide x 93 inches deep x 90 inches high.
- Interior dimensions: 9' 0" x 7' 1" x 6' 10.625".
- Standard door hardware includes a deadbolting locking handle, spring-loaded adjustable hinges, hydraulic closer, dial thermometer, and light switch.
- The refrigeration system uses R448A refrigerant.
Overall Dimensions:
116.0"W x 93.0"D x 90.0"HProduct Weight:
1638.0 lbPre-Charged Remote Refrigeration
The refrigeration system is pre-charged, remote, and rated for indoor or outdoor placement.
Era Floor
The freezer includes a .100 smooth aluminum Era floor.
Galvalume Wall Construction
Interior and exterior walls use 26-gauge embossed Galvalume.
Panel Construction
The walk-in uses 4-inch nominal foamed-in-place polyurethane panels with tongue-and-groove construction and cam locks.
Door Hardware
Standard hardware includes a deadbolting locking handle, two spring-loaded adjustable hinges, a hydraulic closer, a dial thermometer, and a light switch.
LED Lighting
The documented standard features include energy-saving LED lighting, and the door specification identifies a constant-burn LED interior light with a low-wattage nightlight.
Freezer Air Vents
Heated air vents are documented as a standard freezer feature.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.