Jackson WWS

Jackson AJ-100CS Vision Series Steam-Heated Rack Conveyor Dishwasher with Adjustable Speed

SKU: AJ-100CS
$74,250.32
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Jackson AJ-100CS Vision Series Steam-Heated Rack Conveyor Dishwasher with Adjustable Speed

High-Temp Sanitizing, 287 Racks/Hour, 25-Inch Clearance, 2-Tank Design

This steam-heated rack conveyor dishwasher combines 287-rack-per-hour output with adjustable conveyor speed and a 25-inch chamber clearance to keep a busy dishroom moving.

  • High-temp sanitizing rinse delivers up to 287 racks per hour.
  • Adjust-A-Peak conveyor control lets operators vary speed from 144 to 287 racks per hour.
  • Steam coil tank heat supports the wash and power rinse tanks.
  • Standard 25-inch clearance handles trays, sheet pans, and other oversized ware.
  • 304 stainless steel construction and self-draining components support durability and cleanup.
  • Energy Guard automation and auto-fill simplify operation while helping save energy.

Overall Dimensions:

116.0"W x 25.0"D x 75.5"H

Product Weight:

1150.0 lb

Adjust-A-Peak Conveyor Speed

Manual conveyor control lets operators slow the machine for heavier soil loads or increase output up to 287 racks per hour.

High-Temp Sanitizing Rinse

Uses a 180°F to 195°F fresh-water final rinse to sanitize ware.

Steam Coil Tank Heat

Stainless steel steam coils heat the wash and power rinse tanks; steam supply requirements are 10 to 20 PSIG.

Recirculating 2-Tank Design

Includes a recirculating prewash, wash, and power rinse sequence to remove heavy soil before final rinse.

25-Inch Chamber Clearance

Extra clearance through the machine accommodates sheet pans, trays, and large utensils.

Electro-Mechanical Controls

Fully automatic operation includes auto-fill and Energy Guard controls with no solid-state controls.

304 Stainless Steel Construction

Built with 304 series stainless steel components, self-draining pumps, and external lever drains for durability and easy service.

Vent Cowls and Exhaust Support

Standard 8-inch vent cowls and splash shields help connect the machine to an exhaust system, and vent fan control automates fan operation.

Incoming Water Pressure Regulator

Factory-installed regulator helps maintain proper incoming water pressure.

Capacity 287 Racks Per Hour
Controls Electro-Mechanical
Conveyor Speed 8 Feet Per Minute
Drain Connection Required
Drain Connection Size 1 1/2 Inches IPS
Hertz 60 Hz
Installation Type Floor Model
Interior Finish 304 Stainless Steel
Material 304 Stainless Steel
Phase 1-Phase / 3-Phase
Selling Unit Each
Style Rack Conveyor
Tank Design 2 Tank With Pre-Wash
Temperature Range 180°F to 195°F
Type Conveyor Dishwasher
Units Per Case 1
Voltage 208/230/460 Volts
Water Connection Required
Water Inlet Size 3/4 Inch IPS
Water Usage 0.77 Gallons Per Rack
Shipping Width 120 Inches
Shipping Depth 40 Inches
Shipping Height 78 Inches
Shipping Weight 1150 Pounds

Certifications & Compliance

Certified badge of NSF Certified
NSF Certified

Warranty & Protection

1-year limited parts and labor warranty

Frequently Asked Questions

The machine is rated for up to 287 racks per hour with a water usage of 0.77 gallons per rack.
Yes. The wash and power rinse tanks are heated with stainless steel steam coils, and the steam supply requirement is 10 to 20 PSIG.
It has a standard 25-inch chamber clearance, which allows large utensils, trays, sheet pans, and bun pans to pass through.
Yes. The Adjust-A-Peak feature lets the operator manually change conveyor speed from 144 racks per hour up to 287 racks per hour.
The AJ-100CS is listed for 208V, 230V, and 460V at 60 Hz, with 1-phase or 3-phase options depending on the voltage. Total load amperage varies by configuration.
Yes. The series is available for either right-to-left or left-to-right rack flow.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.