Key specifications
- Dimensions
- 29.5"W × 39.0"D × 48.0"H
- Type
- Waste Collection System
- Style
- Standard Tray
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Tray Size
- 23.75 x 21.5 in
Spec sheet
InSinkErator PRS Floor-Model Pre-Rinse and Scrapping Waste Collection System, Standard Tray, 1 GPM Fresh Water, 30 GPM Recirculated Flow
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The InSinkErator PRS is a floor-model waste collection system with a standard tray for pre-rinsing and scrapping dishes in one step.
It requires 1 GPM (3.79 LPM) of fresh water per hour and provides 30 GPM (113.56 LPM) of recirculated water flow capability.
- Pre-plumbed and pre-wired base assembly with control, solenoid, and pump
- Dry-start protection and adjustable run time
- Stainless steel tray, base assembly, cover, pump housing, and pump impeller
- Perforated scrap basket with four ergonomic handles
- Integrated air gap, flanged feet, 2-inch drain discharge, and 1/2-inch NPT water inlets
Overall Dimensions:
29.5"W x 39.0"D x 48.0"HProduct Weight:
157.0 lbStandard Tray
The PRS uses a 23.75 x 21.5-inch standard tray.
Recirculated Water Flow
Provides 30 GPM (113.56 LPM) of recirculated water flow capability.
Fresh Water Requirement
Requires 1 GPM (3.79 LPM) of fresh water per hour.
Pre-Plumbed and Pre-Wired Assembly
The base assembly includes a pre-wired control, solenoid, and pump.
Dry-Start Protection
The pump includes protection against dry operation.
Scrap Basket
The 1/4-inch perforated scrap basket has four ergonomic handles.
Stainless Steel Components
The tray, base assembly, cover, pump housing, and pump impeller are made of stainless steel.
Floor-Securing Feet
Flanged feet allow the unit to be secured to the floor.
Documentation
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.