Key specifications
- Dimensions
- 29.5"W × 39.0"D × 48.0"H
- Type
- Waste Collection System
- Style
- Pot/Pan
- Installation Type
- Undercounter
- Material
- Stainless Steel
- Tray Size
- 35.5 x 21.5 Inches
Spec sheet
InSinkErator PRP Undercounter Stainless Steel Pot/Pan Food Waste Collection System with 30 GPM Recirculation and Dry-Start Protection
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The InSinkErator PowerRinse PRP is a pot/pan food waste collection system for commercial kitchens. It combines pre-rinsing and scraping with up to 30 GPM (113.56 LPM) of recirculated water flow and requires 1 GPM (3.79 LPM) of fresh water per hour.
The pre-plumbed and pre-wired base assembly includes the control, solenoid, and pump. The system collects solids in a perforated scrap basket and sends water-soluble waste to the drain without grinding.
- Pot/Pan tray for oversized cookware
- Dry-start protection for the pump
- Adjustable run time with timed or continuous operation
- Integrated air gap and 2-inch drain discharge
- Stainless steel tray, base assembly, cover, pump housing, and pump impeller
Overall Dimensions:
29.5"W x 39.0"D x 48.0"HProduct Weight:
157.0 lbPot/Pan Tray
Includes a 35.5 x 21.5-inch Pot/Pan tray for oversized cookware such as large sheet pans.
Recirculated Water Flow
Provides recirculated water flow capability of up to 30 GPM (113.56 LPM).
Fresh Water Use
Requires 1 GPM (3.79 LPM) of fresh water per hour.
Dry-Start Protection
The pump is safeguarded against dry operation.
Run-Time Control
Adjustable run time supports timed or continuous operation; the built-in timer is factory set at 20 minutes and the system can be manually shut off.
Pre-Plumbed and Pre-Wired Base
The base assembly includes a pre-wired control, solenoid, and pump.
Scrap Basket
The 1/4-inch perforated scrap basket has four ergonomic handles for collecting solids.
Integrated Air Gap
The waste collector tank includes an integrated air gap.
Stainless Steel Components
The tray, base assembly, cover, pump housing, and pump impeller are made from stainless steel.
Documentation
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.