IMC/Teddy SEC-FT24-14-SG-ADA Security Floor Trough, 168 x 24 x 4 in, 14 ga Stainless Steel, Subway-Style Grating with Drain

SKU: SEC-FT24-14-SG-ADA
$15,106.80
/each
Enter ZIP for a shipping estimate

Want to speak to an expert?

The IMC/Teddy SEC-FT24-14-SG-ADA is a 168-inch-wide security floor trough constructed from 14-gauge type 304 stainless steel. It is 24 inches deep, 4 inches overall deep, and supplied with a drain and SG-ADA-SEC security subway-style grating.

  • Security grating: A continuous security frame secures the grating to the ledge, while a special locking device and tamperproof screws hold the grating securely.
  • Drainage construction: Integral coves and a pitch toward the waste outlet support drainage.
  • Security waste protection: The perforated waste basket is secured with a tamperproof screw.
  • Installation details: The recessed flange supports floor tile and provides a grout pocket.
  • Finish: Exposed surfaces have a brushed satin finish.

Overall Dimensions:

168.0"W x 24.0"D x 4.0"H

Product Weight:

574.0 lb

Security grating

A continuous security frame secures the grating to the ledge, and a special locking device with tamperproof screws holds the grating securely.

Stainless steel construction

The trough is constructed from 14-gauge type 304 stainless steel.

Drainage design

Integral coves and a pitch toward the waste outlet support drainage.

Waste protection

The perforated waste basket is secured with a tamperproof screw.

Recessed flange

The recessed flange supports floor tile and provides a grout pocket.

Installation security

Anchor straps secure the trough to the floor.

Welded construction

Joints are TIG welded and described as leakproof.

Surface finish

Exposed surfaces have a brushed satin finish.

Overall width 168 in
Overall depth 24 in
Overall height 4 in
Trough material 14-gauge type 304 stainless steel
Grating type SG-ADA-SEC security subway-style grating
Grating construction Stainless steel
Pan type Non anti-splash
Drain Included
Waste outlet 6 1/2 in OD
Tailpiece 4 in OD
Surface finish Brushed satin
Weight 574 lb

Frequently Asked Questions

The trough is 168 inches wide, 24 inches deep, and 4 inches overall deep.
The trough is made from 14-gauge type 304 stainless steel.
It uses SG-ADA-SEC security subway-style stainless steel grating.
Yes. The exact product specification identifies it as supplied with a drain.
No. The authoritative category attribute identifies the pan type as non anti-splash.
A continuous security frame secures the grating to the ledge, and a special locking device with tamperproof screws holds it securely.
The listed product weight is 574 pounds.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.