Key specifications
- Type
- Clean Dish Table
- Installation Type
- Floor Model
- Material
- 304 Stainless Steel
- Shape
- Corner
- Direction
- Left-to-Right
- Finish
- Polished #4
Spec sheet
IMC/Teddy SCCD-96-16 Corner Clean Dish Table, Left-to-Right, 30" Machine-to-Corner x 96" Corner-to-End, 8" Splash, 16-Gauge Stainless Steel
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The IMC/Teddy SCCD-96-16 is a left-to-right corner clean dish table designed for use with a commercial dishwasher or ware-washing area.
It has a 16-gauge Type 304 stainless steel top with 16-gauge stainless steel channeling, an 8-inch backsplash, a #4 polished finish, and stainless steel legs and gussets.
- 30-inch machine-to-corner section and 96-inch corner-to-end section
- 2-inch return at 45 degrees, 1/2-inch turn-down, and 1-inch radius corners
- Stainless steel adjustable bullet-type feet and crossbracing
Product Weight:
250.0 lbCorner Configuration
Configured left-to-right with a 30-inch machine-to-corner section and a 96-inch corner-to-end section.
Stainless Steel Top
The top is 16-gauge Type 304 stainless steel with a #4 polished finish.
Stainless Steel Channeling
The understructure uses 16-gauge stainless steel channeling with sound deadening applied to the underside.
Backsplash
Includes an 8-inch backsplash.
Top Edge Details
The top has a 2-inch return at 45 degrees, 1/2-inch turn-down, and 1-inch radius corners.
Legs and Feet
Includes stainless steel legs and gussets with stainless steel adjustable bullet-type feet.
Crossbracing
Uses 1-1/4-inch OD stainless steel tubing crossbracing notched and welded to the legs.
Documentation
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.