Key specifications
- Amps
- 15 Amps
- Phase
- 1-Phase
- Dimensions
- 28.9"W × 31.1"D × 34.1"H
- Type
- Remote Condenser
- Model Compatibility
- CIM0636R
- Material
- Galvanized Steel
Spec sheet
Ice-O-Matic RC106C40 Remote Condenser Accessory for Ice Machine
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Ice-O-Matic RC106C40 is a remote condenser for the CIM0636R ice machine. It features vertical air discharge, a PSC motor, and corrosion-resistant galvanized steel construction.
- Operates at 208-230 Volts, 50-60 Hz, single phase.
- The condenser fan is located outside for quieter interior operation.
- Precharged line sets support assembly and installation.
- Remote condenser operating requirements range from -20°F to 120°F.
Overall Dimensions:
28.9"W x 31.1"D x 34.1"HProduct Weight:
97.0 lbCIM0636R Compatibility
The cut sheet identifies RC106C40 as a remote condenser for model CIM0636R.
Vertical Air Discharge
The condenser uses vertical air discharge.
Galvanized Steel Construction
Constructed from corrosion-resistant galvanized steel.
PSC Motor
The efficient PSC motor is specified to reduce energy usage.
Exterior Condenser Fan
The condenser fan is located outside to support quieter interior operation.
Precharged Line Set Installation
The cut sheet describes assembly and installation with precharged line sets.
Documentation
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.