Key specifications
- Dimensions
- 23.5"W × 23.0"D × 31.38"H
- Type
- Booster Heater
- Style
- Electric
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Capacity
- 16 Gallons
Spec sheet
Hubbell Water Heaters J1627 Electric Storage Booster Heater, 27 kW, 16-Gallon Stainless Steel Tank, Floor Model, Electronic Display
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
J1627 is an electric storage booster heater with a 27 kW rating and 16-gallon capacity for commercial dishroom equipment.
It has an ASME-stamped stainless steel tank, stainless steel exterior, and CFC/HCFC-free closed-cell foam insulation. The electronic display controller includes low water cut-off and leak detection.
- Pressure reducing valve with bypass
- T&P gauge and T&P relief valve
- Adjustable plastic legs for floor-model installation
- UL, cUL, ASME, and UL EPH (ANSI/NSF 5) certifications
Overall Dimensions:
23.5"W x 23.0"D x 31.38"HProduct Weight:
160.0 lbElectric Heating
Provides a 27 kW electric heating rating.
Storage Capacity
Provides 16 gallons of storage capacity.
Stainless Steel Tank
Uses an ASME-stamped stainless steel tank with a stainless steel exterior.
Foam Insulation
Uses CFC/HCFC-free closed-cell foam insulation.
Electronic Display Controller
Electronic display controller includes low water cut-off and leak detection.
Plumbing Components
Specified with a pressure reducing valve with bypass, T&P gauge, and T&P relief valve.
Floor-Model Installation
Adjustable plastic legs support floor-model installation.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.