Key specifications
- Dimensions
- 23.5"W × 23.0"D × 31.38"H
- Type
- Booster Heater
- Style
- Storage
- Installation Type
- Floor Model
- Material
- Stainless Steel
- Capacity
- 16 Gallons
Spec sheet
Hubbell Water Heaters J1610 Electric Storage Booster Heater, 16-Gallon, 10.5 kW, Stainless Steel, Floor Model
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Hubbell Water Heaters J1610 is an electric storage booster heater with a 16-gallon storage capacity and 10.5 kW heating power. It has a stainless steel exterior, an ASME-stamped stainless steel tank, and CFC/HCFC-free closed-cell foam insulation.
- Electronic display controller with low water cut-off and leak detection
- Pressure reducing valve with bypass
- Temperature and pressure gauge with T&P relief valve
- Adjustable plastic legs
- UL, cUL, ASME, and UL EPH (ANSI/NSF 5)
Overall Dimensions:
23.5"W x 23.0"D x 31.38"HProduct Weight:
160.0 lb16-Gallon Storage Capacity
Provides 16 gallons of storage capacity.
10.5 kW Electric Heating
Uses electric heating rated at 10.5 kW.
Stainless Steel Tank and Exterior
Features an ASME-stamped stainless steel tank and stainless steel exterior.
Electronic Display Controller
Includes low water cut-off and leak detection.
Closed-Cell Foam Insulation
Uses CFC/HCFC-free closed-cell foam insulation.
Pressure Reducing Valve
Includes a pressure reducing valve with bypass.
Temperature and Pressure Protection
Includes a T&P gauge and T&P relief valve.
Adjustable Plastic Legs
Includes adjustable plastic legs.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.