Key specifications
- Amps
- 16 Amps
- Phase
- 1-Phase
- Dimensions
- 75.0"W × 34.5"D × 78.5"H
- Type
- Open Merchandiser
- Style
- Sloped
- Installation Type
- Floor Model
Spec sheet
Howard-McCray 35E Series SC-OP35E-6S-LED 75-Inch Self-Contained Sloped Produce Open Merchandiser with 3 LED-Lighted Shelves
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray SC-OP35E-6S-LED is a 75-inch sloped produce open merchandiser with self-contained refrigeration and an endless design.
It features three rows of LED-lighted shelving, a 15-inch product-reflecting mirror, and white exterior and interior finishes. The specified operating temperature range is 38°F to 41°F, and a drain connection is required.
- Dimensions: 75 inches wide by 34.5 inches deep by 78.5 inches high
- Electrical: 115/208-230 Volts, 16 Amps, 60 Hz, single phase
- Connection: Cord and NEMA L14-20P plug
- Compressor size: 1 HP
Overall Dimensions:
75.0"W x 34.5"D x 78.5"HProduct Weight:
1175.0 lbSelf-Contained Refrigeration
The refrigeration system is specified as self-contained.
LED Lighting
The exact model is specified with LED lighting and three rows of lighted shelving.
Sloped Design
Sloped end panels are specified for the produce display.
Endless Design
The endless design allows for continuous lineups.
Product-Reflecting Mirror
A 15-inch product-reflecting mirror is specified.
Electrical Connection
The unit uses 115/208-230 Volts, 16 Amps, 60 Hz, single phase, with a cord and NEMA L14-20P plug.
Drain Requirement
A drain connection is required.
White Interior and Exterior
The authoritative specifications identify a white exterior and white interior.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.