Key specifications
- Amps
- 13.0 Amps
- Phase
- 1-Phase
- Dimensions
- 51.0"W × 34.5"D × 78.5"H
- Type
- Produce Open Merchandiser
- Style
- Sloped
- Installation Type
- Floor Model
Spec sheet
Howard-McCray 35E Series SC-OP35E-4S-S-LED 51-Inch Sloped Stainless Steel Self-Contained Refrigerated Produce Open Merchandiser with 3 LED-Lit Shelves
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray SC-OP35E-4S-S-LED is a 51-inch sloped produce open merchandiser with self-contained refrigeration, stainless steel exterior and interior, and an endless design.
- Three rows of LED-lit shelving support refrigerated product display.
- A 15-inch product-reflecting mirror and sloped end panels are specified for the case.
- The unit operates from 38°F to 41°F and requires a drain connection.
- Electrical specifications are 115/208-230 Volts, 60 Hz, 1-Phase, and 13.0 Amps with a NEMA L14-20P cord and plug.
Overall Dimensions:
51.0"W x 34.5"D x 78.5"HProduct Weight:
965.0 lbSelf-Contained Refrigeration
The merchandiser uses a self-contained refrigeration system.
LED-Lit Shelving
Three rows of shelving are specified with LED lighting.
Stainless Steel Exterior and Interior
The exterior and interior are specified as stainless steel.
Endless Design
The case uses an endless design for continuous lineup configurations.
Product-Reflecting Mirror
A 15-inch product-reflecting mirror is specified.
Sloped End Panels
The merchandiser has sloped end panels.
Electronic Controls
The refrigeration system uses an electronic control system with automatic air defrost.
Cord and Plug
The self-contained unit is specified with a cord and NEMA L14-20P plug.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.