Key specifications
- Amps
- 13 Amps
- Phase
- 1-Phase
- Dimensions
- 51.0"W × 34.5"D × 78.5"H
- Type
- Open Merchandiser
- Style
- Sloped
- Installation Type
- Floor Model
Spec sheet
Howard-McCray 35E Series SC-OP35E-4S-LED 51-Inch Self-Contained Sloped Produce Open Merchandiser with LED Lighted Shelves
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray SC-OP35E-4S-LED is a 51-inch self-contained produce open merchandiser with sloped end panels, endless design, and LED-lit shelving.
- Refrigeration: Self-contained refrigeration with an operating temperature range of 38°F to 41°F.
- Display: Three rows of lighted shelves and a 15-inch product-reflecting mirror.
- Appearance: White exterior and interior.
- Electrical: 115/208-230 Volts, 60 Hz, 1-Phase, 13 Amps, with a NEMA L14-20P cord and plug.
- Installation: A drain is required.
Overall dimensions are 51 inches wide, 34.5 inches deep, and 78.5 inches high.
Overall Dimensions:
51.0"W x 34.5"D x 78.5"HProduct Weight:
965.0 lbSelf-Contained Refrigeration
The unit uses a self-contained refrigeration system.
LED Lighting
LED lighting is provided for the shelving.
Lighted Shelving
The merchandiser has three rows of lighted shelves.
Sloped End Panels
Sloped end panels are specified for the merchandiser.
Endless Design
The endless design allows continuous lineups.
Product-Reflecting Mirror
A 15-inch product-reflecting mirror is specified.
Electronic Control System
The refrigeration system includes electronic controls with automatic air defrost.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.