Key specifications
- Amps
- 15 Amps
- Phase
- 1-Phase
- Dimensions
- 51.0"W × 34.5"D × 60.0"H
- Type
- Open Merchandiser
- Style
- Low Profile
- Installation Type
- Floor Model
Spec sheet
Howard-McCray 35E Series SC-OP35E-4L-B-LED 51-Inch Low-Profile Self-Contained Produce Open Merchandiser, Black, LED-Lit, 1 Lighted Shelf
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray SC-OP35E-4L-B-LED is a 51-inch low-profile produce open merchandiser with self-contained refrigeration, a black exterior and interior, and an endless design for continuous lineups.
- One lighted shelf provides two levels of product display.
- Full-length top lighting and LED-lit shelving support product presentation.
- A full-length product-reflecting mirror enhances the display.
- Operating temperature: 38°F to 40°F.
- Requires a drain connection and uses 115-volt, 15-amp, single-phase power with a 5-20P cord and plug.
Overall Dimensions:
51.0"W x 34.5"D x 60.0"HProduct Weight:
685.0 lbSelf-Contained Refrigeration
The case uses a self-contained refrigeration system with an operating temperature of 38°F to 40°F.
Low-Profile Format
The merchandiser is specified as low profile and measures 60 inches high.
Endless Design
The endless design allows continuous lineups.
LED Lighting
Full-length lighting at the top and one lighted shelf provide LED illumination.
Two-Level Display
One shelving level provides two levels of product display.
Product-Reflecting Mirror
A full-length mirror is included to enhance product display.
Black Interior and Exterior
The exact model is specified with a black exterior and interior.
Drain Requirement
A drain is required for the case.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.