Key specifications
- Amps
- 16 Amps
- Phase
- 1-Phase
- Dimensions
- 51.0"W × 34.5"D × 78.5"H
- Type
- Produce Merchandiser
- Style
- Open
- Installation Type
- Floor Model
Spec sheet
Howard-McCray 35E Series SC-OP35E-4-LED 51-Inch Self-Contained Produce Open Merchandiser with 3 LED-Lit Shelves, White Interior
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray SC-OP35E-4-LED is a produce open merchandiser with self-contained refrigeration, an endless design, and three rows of LED-lit shelves.
- White exterior and interior with a product reflective mirror.
- Straight end panels and LED lighting.
- Rated at 3/4 HP with cord and plug connection.
- A drain is required; check local building codes for connection requirements.
This unit is intended to maintain cold product temperatures, not to make warm items colder.
Overall Dimensions:
51.0"W x 34.5"D x 78.5"HProduct Weight:
700.0 lbSelf-Contained Refrigeration
The merchandiser uses self-contained refrigeration.
LED-Lit Shelves
Three rows of shelves are equipped with LED lighting.
Open Produce Merchandising
The open merchandiser is designed for produce display.
Endless Design
The case has an endless design for merchandising layouts.
Product Reflective Mirror
A product reflective mirror is included in the case design.
White Interior and Exterior
The unit has a white exterior and white interior.
Electrical Connection
The unit is rated for 115 Volts / 208-230 Volts, 60 Hz, 1-Phase, and 16 Amps, with a NEMA L14-20P cord and plug.
Drain Requirement
A drain is required; local building codes should be checked for connection requirements.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.