Key specifications
- Amps
- 16 Amps
- Phase
- 1-Phase
- Dimensions
- 39.0"W × 34.5"D × 78.5"H
- Type
- Produce Merchandiser
- Style
- Sloped Open
- Installation Type
- Floor Model
Spec sheet
Howard-McCray 35E Series SC-OP35E-3S-LED Sloped Open Produce Merchandiser, 39-Inch Wide, Self-Contained, 3 LED-Lit Shelves, White
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray SC-OP35E-3S-LED is a 39-inch sloped open produce merchandiser with self-contained refrigeration, white interior and exterior, and three rows of LED-lit shelving.
Its endless design allows continuous lineups. The unit includes a 15-inch product-reflecting mirror, electronic controls, automatic air defrost, and a required drain connection.
- Dimensions: 39 inches wide, 34.5 inches deep, and 78.5 inches high
- Electrical: 115 Volts, 16 Amps, 60 Hz, 1-Phase, with a NEMA 5-20P plug
- Operating temperature: 38°F to 41°F
Overall Dimensions:
39.0"W x 34.5"D x 78.5"HProduct Weight:
700.0 lbSloped Open Design
Sloped end panels and an endless design allow continuous lineups.
Self-Contained Refrigeration
The unit uses a self-contained refrigeration system with electronic controls and automatic air defrost.
LED Lighting
Includes one row of lighting at the inside top and three rows of lighted shelving.
Product-Reflecting Mirror
Includes a 15-inch product-reflecting mirror.
White Interior and Exterior
The specified finish is white on the exterior and interior.
Electrical Connection
Requires 115 Volts, 16 Amps, 60 Hz, and 1-Phase service with a cord and NEMA 5-20P plug.
Drain Requirement
A drain is required; connection requirements should be checked against local building codes.
Operating Temperature
Operating temperature is 38°F to 41°F.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.