Key specifications
- Amps
- 11.7 Amps
- Phase
- 1-Phase
- Dimensions
- 39.0"W × 30.0"D × 60.0"H
- Type
- Produce Merchandiser
- Style
- Open
- Installation Type
- Floor Model
Spec sheet
Howard-McCray Ovation Series SC-OP30E-3L-S-LED 39-Inch Open Produce Merchandiser with LED Lighted Shelf and Self-Contained Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray SC-OP30E-3L-S-LED is an open produce merchandiser with self-contained refrigeration, stainless steel exterior and interior, and a 39 in W x 30 in D x 60 in H footprint.
- Display: One LED-lighted shelf with a product stop and two levels of product display.
- Refrigeration: Self-contained system with an operating temperature range of 38°F to 41°F.
- Lineup design: Removable ends support continuous case lineups.
- Electrical: 115 Volts, 11.7 Amps, 60 Hz, 1-Phase, with a NEMA 5-15P plug.
- Installation note: A drain is required.
Overall Dimensions:
39.0"W x 30.0"D x 60.0"HProduct Weight:
505.0 lbSelf-Contained Refrigeration
The merchandiser uses a self-contained refrigeration system.
LED Lighting
LED lighting is provided at the inside top of the unit and on one lighted shelf.
Lighted Shelf
The unit includes one 14 in deep lighted shelf with a product stop.
Stainless Steel Construction
The exterior and interior are stainless steel.
Continuous Lineup Design
Removable ends allow continuous lineups.
Temperature Range
The operating temperature range is 38°F to 41°F.
Drain Requirement
A drain is required for the refrigerated case.
Electrical Connection
The unit uses 115 Volts, 11.7 Amps, 60 Hz, 1-Phase power and a NEMA 5-15P plug.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.