Key specifications
- Amps
- 16 Amps
- Dimensions
- 99.0"W × 78.5"H
- Type
- Open Merchandiser
- Style
- Sloped
- Installation Type
- Floor Model
- Material
- Steel
Spec sheet
Howard-McCray 35E Series SC-OD35E-8S-B-LED Self-Contained Dairy Open Merchandiser, 99-Inch Wide x 78-1/2-Inch High, Sloped, LED, Black
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray SC-OD35E-8S-B-LED is a self-contained dairy open merchandiser with a 99-inch width, 78.5-inch height, sloped end panels, endless design, and black interior and exterior.
- Four rows of lighted shelving with LED lighting support refrigerated product display.
- Operating temperature is 38°F to 40°F with automatic air defrost.
- The unit uses an electronic control system and requires a drain connection.
- Electrical specifications are 208-230 volts, 16 amps, and an L14-20P plug.
Overall Dimensions:
99.0"W x 78.5"HProduct Weight:
1580.0 lbSelf-Contained Refrigeration
The refrigerated case uses a self-contained refrigeration system.
Sloped Design
The merchandiser has sloped end panels.
Endless Design
The endless design allows for continuous lineups.
LED Lighting
LED lighting is provided for the merchandiser and shelving.
Lighted Shelving
The unit has four rows of lighted shelving.
Electronic Controls
An electronic control system with automatic air defrost is specified.
Drain Required
A drain is required; connection requirements should be checked against local building codes.
Operating Conditions
The case is designed to operate at 75°F and 55% relative humidity.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.