Key specifications
- BTU
- 6,542 BTU
- Amps
- 3.0 Amps
- Phase
- 1-Phase
- Dimensions
- 51.0"W × 34.5"D × 78.5"H
- Type
- Produce Merchandiser
- Style
- Sloped
Spec sheet
Howard-McCray 35E Series R-OP35E-4S-B-LED Remote Produce Open Merchandiser, 51-Inch, Sloped, Black, 3 LED-Lit Shelves
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray R-OP35E-4S-B-LED is a 51-inch sloped produce open merchandiser designed for remote refrigeration. It has a black interior and exterior, three LED-lit shelf rows, and an endless design.
A 15-inch product reflecting mirror and an R448A expansion valve are included. A drain is required, while remote condensing units and other hookups are not included.
- 51 in wide, 34.5 in deep, and 78.5 in high
- Three LED-lit shelf rows
- 115 Volts, 60 Hz, 1-Phase, and 3.0 Amps
- 6,542 BTU capacity
Overall Dimensions:
51.0"W x 34.5"D x 78.5"HProduct Weight:
835.0 lbRemote Refrigeration
Designed for remote refrigeration; remote condensing units and other hookups are not included.
LED Shelf Lighting
Three rows of shelves have LED lighting.
Endless Design
The endless design supports continuous lineups.
Product Reflecting Mirror
Includes a 15 in product reflecting mirror.
Sloped End Panels
The merchandiser has sloped end panels.
Expansion Valve
An R448A expansion valve is included.
Drain Requirement
A drain is required.
Electrical Requirements
Requires 115 Volts, 60 Hz, 1-Phase power and draws 3.0 Amps.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.