Key specifications
- BTU
- 4,733 BTU
- Amps
- 3 Amps
- Phase
- 1-Phase
- Dimensions
- 51.0"W × 34.5"D × 60.0"H
- Type
- Open Merchandiser
- Installation Type
- Floor Model
Spec sheet
Howard-McCray 35E Series R-OP35E-4L-S-LED 51-Inch Stainless Steel Produce Open Merchandiser, Remote Refrigeration, LED, 1 Lighted Shelf
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
Present produce in a 51-inch open merchandiser designed for remote refrigeration. Stainless steel exterior and interior construction, two product display levels, a full-length reflecting mirror, and an endless design support continuous merchandising layouts.
LED lighting includes full-length lighting at the top and one lighted shelf. The unit has a 38°F to 40°F operating temperature range and includes an R448A expansion valve. A drain is required, while remote condensing units and other hookups are not included.
- 115 Volts, 3 Amps, 60 Hz, 1-Phase electrical requirements
- 34.5-inch depth and 60-inch height
Overall Dimensions:
51.0"W x 34.5"D x 60.0"HProduct Weight:
550.0 lbRemote Refrigeration
Designed for remote refrigeration; remote condensing units and other hookups are not included.
Stainless Steel Construction
The exterior and interior are stainless steel.
LED Lighting
Includes full-length lighting at the top and one lighted shelf.
Two-Level Product Display
Provides two levels for product display.
Endless Design
The endless design allows for continuous lineups.
Reflecting Mirror
Includes a full-length product reflecting mirror.
Operating Temperature
Designed for a 38°F to 40°F operating temperature range.
Drain Requirement
A drain is required for installation.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.