Key specifications
- Product type
- Produce open merchandiser
- Dimensions
- 39.0"W × 78.5"H
- Design
- Endless
- Shelf quantity
- 3 rows
- Shelf lighting
- Lit
- Lighting type
- LED
Howard-McCray R-OP35E-3-LED Produce Open Merchandiser, 39"W x 78-1/2"H, 3 Lit Shelves, LED, Remote Refrigeration
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray R-OP35E-3-LED is a 39-inch-wide produce open merchandiser measuring 78.5 inches high. Its endless design has three rows of lit shelves, LED lighting, and a 15-foot product reflecting mirror.
It is designed for remote refrigeration and includes an R448A expansion valve. A drain is required; remote condensing units and other hookups are not included.
- White exterior and interior
- Straight end panels with a choice of three end panel designs
- 115 V, 60 Hz, single-phase electrical service at 2.0 amps
Overall Dimensions:
39.0"W x 78.5"HProduct Weight:
250.0 lbProduce merchandising
Open merchandiser designed for produce.
Endless design
Built with an endless design for produce merchandising.
Lit shelving
Provides three rows of lit shelves.
LED lighting
Uses LED lighting.
Remote refrigeration
Designed for remote refrigeration and includes an R448A expansion valve; remote condensing units and other hookups are not included.
Product reflecting mirror
Includes a 15-foot product reflecting mirror.
End panels
Features straight end panels with a choice of three end panel designs.
Drain requirement
A drain is required.
Documentation
Certifications & Compliance
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.