Key specifications
- BTU
- 11,883 BTU
- Amps
- 7 Amps
- Phase
- 1-Phase
- Dimensions
- 123.0"W × 34.5"D × 60.0"H
- Type
- Produce Open Merchandiser
- Style
- Endless Design
Spec sheet
Howard-McCray R-OP35E-10L-LED 123-Inch Remote Produce Open Merchandiser, Endless Design, White Interior/Exterior, Lighted Shelf
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray R-OP35E-10L-LED is a 123-inch remote produce open merchandiser with an endless design, low-profile format, and white exterior and interior.
- Provides two levels of product display with one row of lighted shelving.
- Includes full-length lighting at the top and a full-length product-reflecting mirror.
- Designed for remote refrigeration with an R448A expansion valve included.
- Remote condensing units and other hookups are not included. A drain is required.
- Electrical requirements are 115 Volts, 7 Amps, 60 Hz, and 1-Phase.
Overall Dimensions:
123.0"W x 34.5"D x 60.0"HProduct Weight:
1790.0 lbEndless Design
Allows continuous lineups.
Remote Refrigeration
Designed for remote refrigeration; remote condensing units and other hookups are not included.
Display Layout
Provides two levels of product display and one row of lighted shelving.
Lighting
Includes full-length lighting at the top and LED lighted shelving.
Product-Reflecting Mirror
Full-length mirror enhances the product display.
White Interior and Exterior
White finish is specified for the interior and exterior.
Low Profile
Low-profile merchandiser format.
Drain Requirement
A drain is required.
R448A Expansion Valve
R448A expansion valve is included.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.