Key specifications
- BTU
- 6,000 BTU at +20°F Evap Temp
- Amps
- 2 Amps (Lights Only)
- Dimensions
- 63.0"W × 30.0"D × 72.0"H
- Type
- Open Merchandiser
- Installation Type
- Floor Model
- Material
- Stainless Steel
Spec sheet
Howard-McCray Ovation Series R-OP30E-5-S-LED 63-Inch Stainless Steel Produce Open Merchandiser, Remote Refrigeration, LED Lit Shelf
Questions before you buy?
Talk to an equipment specialist about voltage, installation or the right size for your kitchen.
Usually within 1 hour, 9am–6pm EST.
Specifications
Description
The Howard-McCray R-OP30E-5-S-LED is a 63-inch produce open merchandiser with a stainless steel exterior and interior, LED lighting, and one lit shelf with a product stop.
This unit is designed for remote refrigeration. An R448A expansion valve is included, while remote condensing units and other hookups are not included. A drain is required.
- 63 in wide, 30 in deep, and 72 in high
- 2 Amps for lighting
- Operating temperature range of 38°F to 41°F
- Removable ends for continuous lineups
Overall Dimensions:
63.0"W x 30.0"D x 72.0"HProduct Weight:
665.0 lbRemote Refrigeration
Designed for remote refrigeration; remote condensing units and other hookups are not included.
Stainless Steel Construction
Stainless steel exterior and interior.
LED-Lit Shelf
One lit shelf with product stop and LED lighting.
Continuous Lineup
Removable ends support continuous lineups.
R448A Expansion Valve
An R448A expansion valve is included.
Drain Requirement
A drain is required.
Frequently Asked Questions
This ships by freight truck on a pallet, not by a parcel carrier. The carrier calls ahead to set a delivery window, and an adult 18 or older must be there to receive, inspect and sign for it.
The driver brings it to the back of the truck, or lowers it to the ground with liftgate service. They don’t bring it inside, so plan for a pallet jack or two people to move it from the curb.
- Count every piece against the delivery receipt.
- Check every side for crushed corners, torn wrap, punctures, water stains or a tipped unit.
- Photograph the freight on the truck before it’s moved.
- If you see any damage, even cosmetic, write “DAMAGED” and what you see on the receipt before you sign.
Your shipping email has the exact instructions for your order. Questions at the door? Call us at (888) 307-5030.
Keep all the packaging, photograph the damage and the packaging, and tell us within 5 business days of delivery. Reply to your shipping email with the photos or call (888) 307-5030.
If the driver won’t wait while you inspect, write “Received – pending inspection. Driver would not wait.” with the date and time on the receipt, then inspect right away and report any damage within 24 hours.
Book your installer only after the carrier gives you a firm delivery appointment. Freight dates can move, and installer trips lost to a late truck aren’t reimbursable.
Need help deciding?
Our specialist can help you confirm dimensions, building requirements, and other important details before you buy. We usually reply within 1 hour.