Hobart CLeN Steam Blower-Dryer Accessory
Model: Warewash-Flow | Right-to-Left Operation | 380-415 V / 50 Hz / 3-phSlash tray-drying time and keep your dishroom moving with Hobart’s high-performance Steam Blower-Dryer. Purpose-built for CLeN Series conveyor dishwashers, this stainless-steel module forces a curtain of heated, high-velocity air across the ware flow, delivering drier plates, cups and trays straight off the conveyor—no towel touch-ups, no bottlenecks, no extra labor.
Why You’ll Love It
- 33 in. stainless-steel drying chamber integrates seamlessly with CLeN warewashers.
- 2 HP direct-drive industrial blower quietly delivers 200–400 CFM of heated air for rapid, uniform drying.
- Positive forced circulation eliminates water spots and reduces re-racks.
- Energy-efficient steam coil consumes only 55 lb /hr at 20 psi (max 25 psi).
- Blower motor interlocks with dishwasher pumps—runs only when the machine is washing to save energy.
- Heavy-duty “Dual Drive” conveyor pawls handle everything that fits through the warewasher—no height re-adjustments needed.
- All-stainless construction, splash-proof motor and NSF certification guarantee years of worry-free operation.
Technical Specifications
| Direction of operation | Right → Left |
|---|---|
| Electrical | 380–415 V, 50 Hz, 3-phase, 2.6 A (single-point connection, 15 A circuit) |
| Blower motor | 2 HP, splash-proof, direct drive |
| Air volume | 200–400 CFM through full-width orifice |
| Steam requirement | 55 lb /hr @ 20 psi (max 25 psi) |
| Dryer chamber length | 33 in. (838 mm) |
| Vent connection | 4 in. × 16 in. with locking damper (canopy hoods not compatible) |
| Exhaust | 400 CFM (minimum) to atmosphere |
| Compatibility | All Hobart CLeN conveyor models (CL44eN, CL54eN, CL64eN, etc.) |
| Certifications | cULus, NSF |
Installation Notes
- Mounts directly to the washer chamber using supplied stainless-steel hardware and foam-tape gasket.
- Requires 1 in. FPT steam supply and ¾ in. condensate return with bucket traps (included).
- Provide dedicated 4 in. × 16 in. vent duct—do not install under a canopy hood.
- Leveling feet adjust to match dishwasher height; allow 17 3⁄8 in. of clearance above machine.
- All electrical and plumbing must conform to local codes and the latest NEC.
Important: This blower-dryer is an accessory only—dishwasher sold separately.
Install on Hobart CLeN Series conveyor dishwashers only. Incorrect pairing or venting may void warranty.
Need the full spec sheet or CAD file? Visit hobartcorp.com or contact your Hobart representative.
$19,591.72
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Hobart BDSRLBE-HTSDOM undercounter dishwasher with blower dryer and steam; higher-than-standard model, 380-415V 3-ph for fast, sanitary wash results.
Manufacturer
Hobart
Brand name
Warewash - Flow
Specifications
Blower Dryer, Steam, R - L, 380-415v/50/3-ph, Higher Than Standard, Domestic
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.