Hobart BDSRLAL-STDDOM Warewash - Flow Undercounter Dishwashers
Hobart BDSRLAL-STDDOM Warewash - Flow Undercounter Dishwashers is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Description
Hobart CLeN Steam Blower-Dryer Accessory – Right-to-Left
200 – 240 V • 50 Hz • 3-Phase | Standard-Height | Domestic ModelAdd high-speed drying to your Hobart CLeN conveyor dishwasher. This factory-matched steam blower-dryer forces a curtain of heated, high-velocity air across the wareflow, delivering dishes and trays that are dry, cool to handle and ready for immediate service or storage.
Key advantages
- 33 in. stainless steel drying chamber extends dwell time without increasing overall footprint.
- 2 HP direct-drive industrial blower moves 200 – 400 CFM while operating at a low sound level.
- Steam coil heats room air—no electric elements—using only 55 lb/hr of steam at 20 psi.
- Positive forced-air circulation with top-down and redirected up-draft for 360° coverage of ware.
- Smart “blower-on-demand” control runs only when dishwasher pumps are active, saving energy.
- All-stainless construction, splash-proof motor enclosure and wrap-around shroud for long-term durability.
- Ships ready to bolt directly to any compatible Hobart CLeN model—no field fabrication required.
- NSF & cULus listed; meets or exceeds applicable sanitation and safety standards.
Specification highlights
Direction of operation | Right-to-Left |
---|---|
Electrical | 200 – 240 V / 50 Hz / 3-Phase |
Rated amperage | 4.5 A |
Minimum circuit ampacity | 15 A |
Maximum protective device | 15 A |
Blower motor | 2 HP, direct-drive, splash-proof |
Airflow | 200 – 400 CFM |
Steam consumption | 55 lb/hr @ 20 psi (max 25 psi) |
Chamber length | 33 in (838 mm) |
Exhaust connection | 4 in × 16 in vent with locking damper (400 CFM required) |
Plumbing connections | 1 in FPT steam supply • ¾ in FPT condensate return • 1 in FPT drain |
Material | All 300-series stainless steel chamber, tank, legs & adjustable feet |
Compatible warewashers | Hobart CLeN conveyor models (CL44eN, CL54eN, CL64eN, CLCS/CLPS/CLPS, etc.) |
Canopy hoods are not approved for use over this blower-dryer. Provide the dedicated 4 in × 16 in vent connection per installation drawing.
What’s included
- Steam blower-dryer assembly (R-L configuration)
- Mounting hardware & foam gasket
- Bucket-type steam traps
- Installation & operation manual
Upgrade your warewash flow with Hobart’s proven drying technology and keep dishes moving—fast.