Steam Blower-Dryer Accessory for Hobart CLeN Dishwashers
480 V / 60 Hz / 3-Phase • Left-to-Right OperationGive every rack a perfectly dry, ready-to-use finish without hand-toweling. This steam-heated blower module bolts directly to your Hobart CLeN conveyor warewasher, driving high-velocity heated air across dishes, trays and utensils for rapid, consistent drying and lower labour costs.
Key advantages
- Accelerated drying: 2 H.P. direct-drive blower delivers 200 – 400 CFM of heated air.
- Energy-smart steam coil consumes just 55 lb/hr at 20 psi (25 psi max).
- Whisper-quiet industrial fan keeps decibel levels low for a better wash area environment.
- Full-width, 33 in stainless chamber ensures every item on the conveyor is hit with uniform airflow.
- Baffle system redirects air upward to minimise heat transfer to the discharge table and operator.
- Automatic on/off: blower runs only when the warewasher pumps are operating.
- All-stainless construction—including tank, legs and wrap-around panels—for unmatched Hobart durability.
- NSF ® & UL ® certified; designed and built in the U.S.A.
Purpose-built for the CLeN Series
- Compatible with all CLeN conveyor models (CL44eN, CL64eN, CLPS/CLCS 66-86eN, etc.).
- Left-to-Right orientation matches your specified machine flow.
- Factory-supplied foam gasket and stainless hardware for quick, leak-free installation.
- Controller circuit integrates with the warewasher—no separate start-up procedure required.
Specifications
| Electrical | 480 V / 60 Hz / 3-phase, 2.6 A (single-point connection) |
|---|---|
| Blower Motor | 2 H.P., splash-proof, ventilated |
| Air Volume | 200 – 400 CFM forced, downward draft |
| Steam Consumption | 55 lb per hr @ 20 psi (25 psi max) |
| Steam Connection | 1" FPT inlet • ¾" FPT condensate return (bucket traps furnished) |
| Drain | 1" FPT in dryer tank |
| Vent | 4" × 16" stack, 400 CFM exhaust (optional Hobart vent hood w/ locking damper) |
| Chamber Length | 33 in (838 mm) |
| Overall Height | Approx. 83 in ( with CL44eN base ) |
| Clearance Above Machine | 17 ⅜ in added height |
| Material | 304 stainless steel throughout |
| Orientation | Left-to-Right conveyor flow |
Important: This accessory requires a dedicated 4" × 16" vent connection and cannot be used under a traditional canopy hood. Follow all local electrical, plumbing and steam codes during installation.
As part of Hobart’s policy of continuous product improvement, specifications are subject to change without notice.
$19,591.72
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Hobart BDSLRCD-HTSDOM undercounter dishwasher: high-capacity, steam & blower dryer, L-R flow, 480V 3-ph for faster domestic-grade commercial cleaning.
Manufacturer
Hobart
Brand name
Warewash
Specifications
Blower Dryer, Steam, L - R, 480v/60/3-ph, Higher Than Standard, Domestic
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.