Hobart BDSLRBE-STDDOM Warewash Undercounter Dishwashers
Hobart BDSLRBE-STDDOM Warewash Undercounter Dishwashers is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Description
Hobart CLeN Steam Blower-Dryer Accessory
Left-to-Right • 380–415 V / 50 Hz / 3-Phase • Standard HeightTransform your Hobart CLeN conveyor dishwasher into a high-speed drying powerhouse. This factory-engineered steam blower-dryer sweeps high-velocity heated air across ware as soon as it leaves the final rinse, reducing flash-dry time, boosting throughput and sending plates straight to service.
Why you’ll love it
- 33 in stainless-steel drying chamber built exclusively for CLeN models
- 2 HP direct-drive blower delivers 200–400 CFM of heated air while keeping noise low
- Steam-heated coil (55 lb hr-1 @ 20 psi) accelerates drying without added electric elements
- Vertical airflow covers the full belt width for consistent results on plates, trays and utensils
- Internal baffles recirculate air to minimise heat spillover to discharge tables and operators
- Runs only when the dishwasher pumps operate, conserving energy during idle periods
- All-stainless construction, splash-proof motor and wrap-around shroud for long service life
Key specifications
Direction of operation | Left to Right |
---|---|
Power supply | 380–415 V, 50 Hz, 3-phase |
Rated current | 2.6 A |
Minimum circuit / Max OCPD | 15 A / 15 A |
Blower motor | 2 HP direct-drive |
Airflow | 200–400 CFM |
Steam consumption | 55 lb hr-1 @ 20 psi (max 25 psi) |
Steam connection | 1" FPT |
Condensate return | ¾" FPT (bucket trap supplied) |
Drain connection | 1" FPT |
Vent connection | 4" × 16" (inside), 400 CFM exhaust |
Chamber length | 33 in (838 mm) |
Height above machine | ≈ 17 ⅜ in (441 mm) |
Compatible dishwashers | All Hobart CLeN conveyor models (CL44eN, CLPS66eN, CLCS66eN, CL54eN, CLPS76eN, CLCS76eN, CL64eN, CLPS86eN, CLCS86eN) |
Canopy hoods cannot be used with this blower-dryer. A dedicated 4 in × 16 in vent providing 400 CFM exhaust is required.
Simple installation
- Bolts directly to the dishwasher wash chamber—no special brackets needed
- Single-point three-phase electrical hook-up
- Factory foam gasket ensures a watertight seal between modules
- Integrated control runs automatically with the dishwasher pumps
Give your dishroom a competitive edge—add the Hobart CLeN steam blower-dryer and send dinnerware out the door faster, drier and ready to impress.