Hobart CLeN All-Electric Blower-Dryer Accessory
Right-to-Left • 600 V / 60 Hz / 3-PhaseGive your CLeN conveyor warewasher a productivity boost with Hobart’s stainless-steel blower-dryer. A powerful 2 H.P. direct-drive fan forces 600-volt heated air across the full width of the conveyor, delivering dishes, flatware and trays that are ready to use or stack—no towels, no waiting.
Why you’ll love it
- Rapid, even drying from a 10 kW Incoloy® electric heater bank.
- High-velocity air stream driven by a quiet industrial blower (2 H.P.).
- 33 in (838 mm) stainless-steel chamber built to NSF & UL standards.
- “Dual Drive” stainless-steel conveyor pawls integrate seamlessly with CLeN machines—no field mods.
- Baffle system keeps heat in the chamber and away from operators or adjacent tables.
- Single-point, three-phase electrical connection simplifies installation.
- Ambient-temperature-compensated, solid-state overload protection for worry-free operation.
Technical specifications
| Direction of operation | Right → Left (R-L) |
|---|---|
| Supply voltage | 600 V / 60 Hz / 3-Phase |
| Rated amps | 12.6 A |
| Min. circuit ampacity | 20 A |
| Max. protective device | 20 A |
| Blower motor | 2 H.P. direct drive, splash-proof enclosure |
| Heating capacity | 10 kW (3 × 3.3 kW Incoloy® elements) |
| Chamber length | 33 in L |
| Overall height above washer | ≈ 17 3⁄8 in |
| Vent connection | 4 × 16 in (inside dimension); 200–400 CFM required |
| Exhaust hood | Optional vent hood with locking damper (canopy hoods cannot be used) |
| Construction | All stainless steel, welded & bolted |
| Compatibility | All Hobart CLeN conveyor models (CL44eN, CL54eN, CL64eN, CLPS & CLCS series) |
Installation highlights
- Ships as one piece; bolts directly to the CLeN wash chamber using the supplied stainless hardware and foam gasket.
- 1 in FPT drain connection in dryer tank.
- Electrical knockout provided (1 ⅛ in conduit hole, 61 in AFF).
- Blower motor is interlocked with the warewasher pumps—runs only when the machine is washing.
Important: A 4 × 16 in dedicated exhaust duct (200–400 CFM) is required.
Installing the blower-dryer beneath a standard canopy hood will impair performance and void NSF compliance.
Listing is for the blower-dryer accessory only. CLeN warewasher sold separately. Always follow national and local electrical, plumbing and ventilation codes.
$16,413.79
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to
?
Hobart BDERLET-HTSDOM undercounter dishwasher with electric blower dryer, high-temp 600V 3-phase power—fast, efficient drying for domestic kitchens.
Manufacturer
Hobart
Brand name
Warewash
Specifications
Blower Dryer, electric, R - L, 600v/60/3-ph, higher than standard, Domestic
Contact Us
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.