Free shipping on your first order over $5000 – use code TeamUSA at checkout!
Hobart  |  Warewash - Flow  |  SKU: BDERLBX-HTSDOM

Hobart BDERLBX-HTSDOM Warewash - Flow Undercounter Dishwashers

$16,718.46
Expected delivery date of , to your door
if ordered within hours and minutes
Not Shipping to ?
More Delivery Options
Documents
Cutsheet Terms & conditions
Related Searches
Bar Equipment Dishwashers Undercounter Dishwashers

Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.

Description

Hobart CLeN Series All-Electric Blower-Dryer Accessory

Right-to-Left Flow | 240 V / 60 Hz / 3-Phase

Eliminate towel-drying and keep your warewashing line moving. This Hobart all-electric blower-dryer bolts directly to any CLeN conveyor dishwasher, blasting high-velocity heated air across every rack for spot-free, table-ready results—fast.

Key Benefits

  • Rapid, uniform drying via a 2 H.P. direct-drive industrial blower.
  • 10 kW of Incoloy® electric heat with thermostat and over-temp protection.
  • Full 33 in. stainless-steel chamber spans the conveyor for consistent coverage.
  • Quiet operation—high performance at a low sound level.
  • Automatic start/stop with dishwasher pump motors; no extra switches.
  • Rugged wrap-around stainless panels shield the heater, motor and controls.
  • UL and NSF listed for safety and sanitation.

Technical Specifications

Direction of operation Right → Left
Chamber length 33 in. (838 mm)
Blower motor 2 H.P. splash-proof, direct-drive
Heating elements 3 × 3.3 kW Incoloy® (total 10 kW)
Electrical load 30.7 A @ 240 V / 60 Hz / 3-Ph (40 A min. circuit)
Connection point 1 ⅛ in. conduit opening provided
Exhaust requirement 200–400 CFM through 4 × 16 in. duct (locking damper included)
Clearance above machine ≈ 17 ⅜ in. (441 mm)
Certifications cULus, NSF

Installation & Compatibility

  • Compatible with all Hobart CLeN conveyor dishwashers (CL44eN, CL54eN, CL64eN, CLPS/CLCS series and more).
  • Supplied stainless hardware & foam gasket seal the dryer chamber to the wash chamber—no field fabrication required.
  • Controller runs on 115 V supplied by the warewasher; the dryer powers up only when the machine is operating.
  • Requires a dedicated 240 V/60 Hz/3-phase feed and a 4 × 16 in. exhaust duct—do not install under a canopy hood.
Important: Canopy hood installations are incompatible with this blower-dryer. Provide the specified 4 × 16 in. exhaust duct and maintain 200–400 CFM airflow.

Need a left-to-right model or alternate voltage? Hobart offers multiple configurations—contact us for details.

Features & Specs

Manufacturer

Hobart

Brand_name

Warewash - Flow

Specifications

Blower Dryer, Electric, R - L, 240v/60/3-ph, Higher Than Standard, Domestic
Back to top