Hatco

Hatco Imperial Electric Booster Water Heater, 16 Gallon, 54 kW, 208V, 3-Phase

SKU: S-54-208-3-QS
GTIN: 61570000433
$5,275.05
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Hatco Imperial Electric Booster Water Heater, 16 Gallon, 54 kW, 208V, 3-Phase

Castone® Lined Tank, Stainless Steel Front Panel, Powder-Coated Silver-Gray Body

Built for high-volume dish rooms, this electric booster water heater delivers reliable sanitizing rinse water from a 16-gallon Castone®-lined tank.

  • 16-gallon electric booster heater for commercial dish room sanitizing rinse applications.
  • 54 kW output at 208V/60Hz/3-phase supports demanding warewashing volume.
  • Up to 573 GPH of sanitizing rinse water helps keep dish production moving.
  • Castone® lined tank, heat trap, and fiberglass insulation help minimize heat loss.
  • Factory pre-plumbed and pre-wired with front-access service area for easier installation.
  • Stainless steel front panel, powder-coated body, and 6-inch legs provide durable, service-friendly construction.

Overall Dimensions:

23.63"W x 22.75"D x 31.13"H

Product Weight:

224.0 lb

High-Volume Sanitizing Output

Provides up to 573 GPH of sanitizing rinse water for busy dish rooms.

16-Gallon Storage Capacity

Helps maintain a ready supply of heated water during peak demand.

Castone® Lined Tank

Non-toxic, non-corrosive tank lining with a 10-year limited warranty.

Factory Pre-Plumbed and Pre-Wired

Calibrated immersion thermostats and high-temperature limit switch come preconfigured for easier installation.

Built-In Safety Controls

Includes a temperature/pressure relief valve, pressure reducing valve, two gauges, high-temperature limit control, pilot indicator light, on/off switch, and low-water cut-off.

Heat Retention Design

Built-in heat trap and fiberglass insulation help reduce heat loss.

Durable Exterior

Stainless steel front panel with a powder-coated silver-gray hammertone body stands up to commercial use.

Floor-Standing Design

6-inch plastic non-adjustable legs elevate the unit for placement and service access.

Type Booster Heater
Installation Type Floor Model
Capacity 16 Gallons
Voltage 208 Volts
Watts 54 kW
Hertz 60 Hz
Phase 3-Phase
Controls Thermostatic
Water Inlet Size 3/4 Inch
Finish Powder-Coated Silver-Gray Hammertone
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 24 Inches
Shipping Depth 23 Inches
Shipping Height 32 Inches
Shipping Weight 224 lb.

Frequently Asked Questions

It has a 16-gallon (60 liter) storage capacity.
It is rated for 208V, 60 Hz, 3-phase power and 54.0 kW.
Yes. It is factory pre-plumbed and pre-wired, and the service area is accessible from the front.
Standard safety components include a temperature/pressure relief valve, pressure reducing valve, two gauges, a high-temperature limit control, pilot indicator light, on/off switch, and low-water cut-off.
Yes. The thermostats can be lowered to a 140°F (60°C) setting for low-temp dishmachines.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.