Hatco

Hatco Imperial Electric Booster Water Heater, 16 Gallon, 15 kW, 208V, 3-Phase

SKU: S-15-208-3-QS
GTIN: 61570000427
$3,911.05
/each
Free Shipping
Expected delivery date of ,
if ordered within hours and minutes
Not Shipping to ?
Want to speak to an expert?

Hatco Imperial Electric Booster Water Heater, 16 Gallon, 15 kW, 208V, 3-Phase

Floor Model with Stainless Steel Front Panel and Castone Lined Tank

Built for high-volume dish rooms, this floor-mounted electric booster water heater delivers dependable 16-gallon sanitizing support with rugged, easy-service construction.

  • 16-gallon storage capacity supports up to 573 GPH of sanitizing rinse water.
  • 15.0 kW electric operation on 208V/60/3-phase service.
  • Castone lined tank includes a 10-year limited warranty.
  • Factory pre-plumbed and pre-wired design simplifies installation.
  • Built-in safety controls include relief valves, gauges, high-temperature limit control, and low-water cut-off.
  • Stainless steel front panel, powder-coated body, and 6-inch plastic legs provide durable floor-mounted construction.

Overall Dimensions:

23.63"W x 22.75"D x 31.13"H

Product Weight:

200.0 lb

16-Gallon Storage Capacity

Provides a 16-gallon tank for sanitizing rinse water in busy dish room applications.

High-Output Sanitizing Performance

Delivers up to 573 GPH of sanitizing rinse water to help keep dishwashing operations moving.

Castone Lined Tank

Non-toxic, non-corrosive Castone lining is standard and backed by a 10-year limited warranty.

Factory Pre-Plumbed and Pre-Wired

Arrives pre-plumbed and pre-wired with calibrated immersion thermostats and a high-temperature limit switch for easier installation.

Built-In Safety Controls

Includes a temperature/pressure relief valve, pressure reducing valve, two temperature/pressure gauges, a high-temperature limit control, pilot indicator light, on/off switch, and low-water cut-off.

Heat Retention Design

Built-in heat trap and fiberglass insulation help minimize heat loss.

Front Service Access

Front-access service area helps simplify installation, even when placed near other equipment.

Durable Exterior Construction

Features a stainless steel front panel and a powder-coated silver-gray hammertone body.

6-Inch Plastic Legs

Non-adjustable legs elevate the unit for floor installation.

Lower Temperature Setting Capability

Thermostats can be lowered to 140°F for use with low-temperature dishmachines.

Type Booster Water Heater
Installation Type Floor Model (6-Inch Legs)
Capacity 16 Gallons
Controls Thermostatic
Watts 15 kW
Voltage 208 Volts
Hertz 60 Hz
Phase 3-Phase
Water Connection Required
Water Inlet Size 3/4 Inch
Finish Powder-Coated Silver-Gray Hammertone
Interior Finish Castone
Country of Origin USA
Selling Unit Each
Units Per Case 1
Shipping Width 24 Inches
Shipping Depth 23 Inches
Shipping Height 32 Inches
Shipping Weight 200 lb.

Frequently Asked Questions

It has a 16-gallon storage capacity.
It operates on 208 volts, 60 Hz, 3-phase power and is rated at 15.0 kW.
Yes. The thermostats can be lowered to 140°F for low-temperature dishmachines.
Standard safety features include a temperature/pressure relief valve, pressure reducing valve, two temperature/pressure gauges, a high-temperature limit control, pilot indicator light, on/off switch, and low-water cut-off.
The unit is factory pre-plumbed and pre-wired, and the service area is accessible from the front for easier installation.
The Castone lined tank includes a 10-year limited warranty.

Need Help Deciding?

Our equipment specialists can help you match specs to your kitchen layout, electrical capacity, and menu requirements.