Hatco PMG-100 Powermite® High Temp & Low Temp Dishwashers
Hatco PMG-100 Powermite® High Temp & Low Temp Dishwashers is backordered and will ship as soon as it is back in stock.
Documents
Related Searches
Reach out via chat, email, or phone—we're here to help make sure it's the right fit for your kitchen. Contact us for more information.
Hatco PMG-100 Powermite® High Temp & Low Temp Dishwashers
Description
Hatco Powermite® PMG-100 Gas Booster Water Heater
4.75 gal - 105,000 BTU - Made in USADeliver a consistent 180°F (82°C) sanitizing rinse right at the dishwasher while eliminating the heat loss of remote water heaters. Compact enough to slip beneath a dishtable yet powerful enough to keep up with high-volume kitchens, the Powermite® PMG-100 is the dependable, gas-fired booster that operators have trusted for decades.
Why you’ll love it
- Rapid recovery — 105,000 BTU forced-draft burner with three tube-type burners heats up to 321 gal/hr (1,215 L/hr) at a 30°F rise.
- Compact 4.75 gal (18 L) stainless-steel tank stores just the right amount of 180°F rinse water.
- Built-in blended phosphate water treatment system helps prevent scale and extend equipment life.
- Low-water cut-off, high-limit ECO and factory-installed T/P relief valve add multiple layers of safety.
- Front-mounted indicator light and on/off switch simplify daily operation.
- Stainless-steel front plus powder-coated, antimicrobial* sides & back resist scratches and microbes.
- Field-convertible for natural or LP gas; 120 V cord & plug supplied for controls.
- UL EPH Classified, CSA certified and proudly built in Milwaukee, Wisconsin.
Performance at a glance
| Storage capacity | 4.75 gal / 18 L |
|---|---|
| Input / output | 105,000 BTU/hr (30.8 kW) / 84,800 BTU/hr (24.8 kW) |
| Recovery @ 40°F rise | 241 gal/hr (912 L/hr) |
| Gas connection | ¾" NPT, natural or LP |
| Water connections | ¾" NPT inlet & outlet |
| Electrical | 120 VAC, 360 W, 3 A |
| Operating water pressure | 150 psi (1,034 kPa) max – relief set at 150 psi, 210°F |
| Exterior dimensions | 27.45" W × 20.73" D × 31" H (720 × 625 × 787 mm) incl. 6" legs |
| Ship weight | 193 lb (88 kg) |
Factory-installed safeguards
- Temperature/pressure relief valve
- Pressure reducing valve with bypass
- Dual temperature/pressure gauges
- Low-water cut-off
- High-temperature limit (ECO)
- Shock absorber to reduce water hammer
*IFS antimicrobial powder coating uses silver ions to inhibit microbe growth on the coated surface. Refer to the Powermite® PMG Installation & Operating Manual for complete installation, venting and altitude-adjustment guidelines.
